AD9992_07 AD [Analog Devices], AD9992_07 Datasheet - Page 29

no-image

AD9992_07

Manufacturer Part Number
AD9992_07
Description
12-Bit CCD Signal Processor with Precision Timing Generator
Manufacturer
AD [Analog Devices]
Datasheet
VERTICAL SEQUENCES (VSEQ)
The vertical sequences are created by selecting one of the V-pattern
groups and adding repeats, start position, horizontal clamping,
and blanking information. The V-sequences are programmed
using the registers shown in Table 14. Figure 35 shows how
the different registers are used to generate each V-sequence.
The VPATSELA, VPATSELB, VPATSELC, and VPATSELD
registers select which V-pattern is used in a given V-sequence.
Having four groups available allows different vertical outputs to
be mapped to different V-patterns. The selected V-pattern group
can have repetitions added for high speed line shifts or for line
binning by using the VREP registers for odd and even lines.
Generally, the same number of repetitions is programmed
XV1 TO XV24
CLPOB
HBLK
HD
PROGRAMMABLE SETTINGS FOR EACH VERTICAL SEQUENCE:
1
2
3
4
5
6
START POSITION IN THE LINE OF SELECTED V-PATTERN GROUP.
HD LINE LENGTH.
V-PATTERN SELECT (VPATSEL) TO SELECT ANY V-PATTERN GROUP.
NUMBER OF REPETITIONS OF THE V-PATTERN GROUP (IF NEEDED).
START POLARITY AND TOGGLE POSITIONS FOR CLPOB AND PBLK SIGNALS.
MASKING POLARITY AND TOGGLE POSITIONS FOR HBLK SIGNAL.
5
6
V-PATTERN GROUP
1
3
Figure 35. V-Sequence Programmability
Rev. C | Page 29 of 92
VREP 2
4
2
into both registers. If a different number of repetitions is required
on odd and even lines, separate values can be used for each
register (see the Generating Line Alternation for V-Sequences
and HBLK section). The VSTARTA and VSTARTB registers
specify where in the line the V-pattern group starts. The
VMASK_EN register is used with the FREEZE/RESUME
registers to enable optional masking of the V-outputs. Either or
both of the FREEZE1/RESUME1 and FREEZE2/RESUME2
registers can be enabled.
The line length (in pixels) is programmable using the HDLEN
registers. Each V-sequence can have a different line length to
accommodate various image readout techniques. The maximum
number of pixels per line is 8192. The last line of the field is
programmed separately using the HDLASTLEN register, which
is located in the field register section.
VREP 3
4
AD9992

Related parts for AD9992_07