PIC18F13K50-E/P MICROCHIP [Microchip Technology], PIC18F13K50-E/P Datasheet - Page 298

• Manufacturer Part Number: PIC18F13K50-E/P
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F1XK50/PIC18LF1XK50
24.2
For PIC18F1XK50/PIC18LF1XK50 devices, the WDT
is driven by the LFINTOSC source. When the WDT is
enabled, the clock source is also enabled. The nominal
WDT period is 4 ms and has the same stability as the
LFINTOSC oscillator.
The 4 ms period of the WDT is multiplied by a 16-bit
postscaler. Any output of the WDT postscaler is
selected by a multiplexer, controlled by bits in Configu-
ration Register 2H. Available periods range from 4 ms
to 131.072 seconds (2.18 minutes). The WDT and
postscaler are cleared when any of the following events
occur: a SLEEP or CLRWDT instruction is executed, the
IRCF bits of the OSCCON register are changed or a
clock failure has occurred.
FIGURE 24-1:
DS41350C-page 296
Change on IRCF bits
Note 1: The CLRWDT and SLEEP instructions
All Device Resets
LFINTOSC Source
2: Changing the setting of the IRCF bits of
3: When a CLRWDT instruction is executed,
WDTPS<3:0>
Watchdog Timer (WDT)
clear the WDT and postscaler counts
when executed.
the OSCCON register clears the WDT
and postscaler counts.
the postscaler count will be cleared.
SWDTEN
CLRWDT
WDTEN
Sleep
WDT BLOCK DIAGRAM
Enable WDT
WDT Counter
÷128
4
Preliminary
Programmable Postscaler
1:1 to 1:32,768
Reset
© 2009 Microchip Technology Inc.
WDT
Reset
Wake-up
from Power
Managed Modes