S9S12P96J0VFTR Freescale Semiconductor, S9S12P96J0VFTR Datasheet - Page 50

• Manufacturer Part Number: S9S12P96J0VFTR
• Description: 16-bit Microcontrollers - MCU 16 BIT 96K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12P96J0VFTR

• Rohs: yes
• Core: S12
• Processor Series: MC9S12P
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 16 MHz
• Program Memory Size: 96 KB
• Data Ram Size: 6 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.15 V to 5.5 V
• Operating Temperature Range: - 40 C to + 105 C

Port Integration Module (S12PPIMV1)
2.1.2
The Port Integration Module includes these distinctive registers:
A standard port pin has the following minimum features:
Optional features supported on dedicated pins:
2.2
This section lists and describes the signals that do connect off-chip.
Table 2-1
50
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Open drain for wired-or connections
Interrupt inputs with glitch filtering
Data registers and data direction registers for Ports A, B, E, T, S, M, P, J and AD when used as
general purpose I/O
Control registers to enable/disable pull devices and select pull-ups/pull-downs on Ports T, S, M, P
and J on per-pin basis
Control registers to enable/disable pull-up devices on Port AD on per-pin basis
Single control register to enable/disable pull-ups on Ports A, B, and E, on per-port basis and on
BKGD pin
Control registers to enable/disable reduced output drive on Ports T, S, M, P, J and AD on per-pin
basis
Single control register to enable/disable reduced output drive on Ports A, B, and E on per-port basis
Control registers to enable/disable open-drain (wired-or) mode on Ports S and M
Interrupt flag register for pin interrupts on Ports P and J
Control register to configure IRQ pin operation
Routing register to support module port relocation
Free-running clock outputs
Input/output selection
5V output drive with two selectable drive strengths
5V digital and analog input
Input with selectable pull-up or pull-down device
External Signal Description
shows all the pins and their functions that are controlled by the Port Integration Module.
Features
If there is more than one function associated with a pin, the priority is
indicated by the position in the table from top (highest priority) to bottom
(lowest priority).
S12P-Family Reference Manual, Rev. 1.13
NOTE
Freescale Semiconductor