BTS5242-2L Infineon Technologies, BTS5242-2L Datasheet - Page 29

• Manufacturer Part Number: BTS5242-2L
• Description: IC PWR SWITCH HISIDE PG-DSO-12-9
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS5242-2L

• Package / Case: DSO-12
• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 19 mOhm
• Current - Output / Channel: 6A
• Current - Peak Output: 50A
• Voltage - Supply: 4.5 V ~ 28 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• On Resistance (max): 0.019 Ohms
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Maximum Power Dissipation: 1400 mW
• Mounting Style: SMD/SMT
• Supply Current: 3.2 mA
• Power Load Switch Type: High Side
• Input Voltage: 28V
• Current Limit: 40A
• On State Resistance: 0.019ohm
• Thermal Protection: ESD
• Power Dissipation Pd: 1.4W
• No. Of Outputs: 2
• Internal Switch: No
• Rohs Compliant: Yes
• Distribution Switch Case Style: SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: BTS5242-2LINTR; BTS52422LXT; SP000281082

Smart High-Side Power Switch
BTS 5242-2L
Edition 2006-08-14
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
©
Infineon Technologies AG 8/22/06.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Target Data Sheet
29
V1.2, 2006-08-14