BTS117 Infineon Technologies, BTS117 Datasheet - Page 11

• Manufacturer Part Number: BTS117
• Description: IC LOW SIDE SW PWR 3.5A TO-220-3
• Manufacturer: Infineon Technologies
• Series: HITFET®r
• Type: Low Sider

Specifications of BTS117

• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 80 mOhm
• Current - Output / Channel: 3.5A
• Current - Peak Output: 25A
• Voltage - Supply: 2.2 V ~ 10 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Through Hole
• Package / Case: TO-220-2
• Module Configuration: Low Side
• Peak Output Current: 3.5A
• Output Resistance: 0.08ohm
• Input Delay: 40µs
• Output Delay: 70µs
• Supply Voltage Range: 1.3V To 10V
• Driver Case Style: TO-220
• No. Of Pins: 3
• Packages: P-TO220-3
• Channels: 1.0
• Vds (max): 60.0 V
• Id(nom): 3.5 A
• Rds (on) (max): 100.0 mOhm
• Id(lim) (min): 7.0 A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS117IN; BTS117NK; SP000011195

Edition 2008-12-10
Published by
Infineon Technologies AG
81726 Munich, Germany
Infineon Technologies AG 2008.
©
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values
stated herein and/or any information regarding the application of the device, Infineon Technologies hereby
disclaims any and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.