TMP86C909XB Toshiba, TMP86C909XB Datasheet - Page 53

• Manufacturer Part Number: TMP86C909XB
• Description: EMULATION CHIP FOR TMP86F SDIP
• Manufacturer: Toshiba

Specifications of TMP86C909XB

• Accessory Type: Adapter
• For Use With/related Products: TMP86F SDIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.8 External Interrupts
Note 1: In NORMAL1/2 or IDLE1/2 mode, if a signal with no noise is input on an external interrupt pin, it takes a maximum of "sig-
Note 2: When INT0EN = "0", IL4 is not set even if a falling edge is detected on the
Note 3: When a pin with more than one function is used as an output and a change occurs in data or input/output status, an inter-
Source
INT0
INT1
INT3
INT4
INT5
nal establishment time + 6/fs[s]" from the input signal's edge to set the interrupt latch.
rupt request signal is generated in a pseudo manner. In this case, it is necessary to perform appropriate processing such
as disabling the interrupt enable flag.
INT1
INT3
INT4
INT0
INT5
Pin
IMF EF4 INT0EN=1
IMF EF5 = 1
IMF EF11 = 1
and
IL11ER
IMF EF14 = 1
IMF EF15 = 1
Enable Conditions
Falling edge
Falling edge
or
Rising edge
Falling edge,
Rising edge,
Falling and Rising edge
or
H level
Falling edge,
Rising edge,
Falling and Rising edge
or
H level
Falling edge
Release Edge (level)
Page 42
Pulses of less than 2/fc [s] are eliminated as
noise. Pulses of 7/fc [s] or more are considered
to be signals. In the SLOW or the SLEEP mode,
pulses of less than 1/fs [s] are eliminated as
noise. Pulses of 3.5/fs [s] or more are consid-
ered to be signals.
Pulses of less than 15/fc or 63/fc [s] are elimi-
nated as noise. Pulses of 49/fc or 193/fc [s] or
more are considered to be signals. In the SLOW
or the SLEEP mode, pulses of less than 1/fs [s]
are eliminated as noise. Pulses of 3.5/fs [s] or
more are considered to be signals.
Pulses of less than 7/fc [s] are eliminated as
noise. Pulses of 25/fc [s] or more are considered
to be signals. In the SLOW or the SLEEP mode,
pulses of less than 1/fs [s] are eliminated as
noise. Pulses of 3.5/fs [s] or more are consid-
ered to be signals.
Pulses of less than 7/fc [s] are eliminated as
noise. Pulses of 25/fc [s] or more are considered
to be signals. In the SLOW or the SLEEP mode,
pulses of less than 1/fs [s] are eliminated as
noise. Pulses of 3.5/fs [s] or more are consid-
ered to be signals.
Pulses of less than 2/fc [s] are eliminated as
noise. Pulses of 7/fc [s] or more are considered
to be signals. In the SLOW or the SLEEP mode,
pulses of less than 1/fs [s] are eliminated as
noise. Pulses of 3.5/fs [s] or more are consid-
ered to be signals.
INT0
pin input.
Digital Noise Reject
TMP86F409NG