CY8CKIT-001 Cypress Semiconductor Corp, CY8CKIT-001 Datasheet - Page 46

• Manufacturer Part Number: CY8CKIT-001
• Description: KIT DEV FOR PSOC3/5
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC® CapSenser
• Type: MCUr

Specifications of CY8CKIT-001

• Contents: Board, CD, CY8C29 & CY8C38 Modules, MiniProg3 Programmer/Debugger, Power Supply
• Processor To Be Evaluated: CY8C29, CY8C38
• Interface Type: RS-232, USB, JTAG
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PSoC 1, PSoC 3 and PSoC 5
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2961

Sample Projects
42
25.Open your main.c file and copy the example code located in section
26.Open your Counter8_1INT.asm file in Files
27.Save the project.
28.To Build the project, click Build
29.Disconnect power to the board.
30.Configure the DVK bread board SW3 to 5V.
31.Configure the DVK bread board using the included jumper wires as follows:
32.Connect a serial cable to the PC and the DVK board.
33.On the DVK board, verify that RS232_PWR(J10) is jumpered to ON.
34.Reapply power to the board.
35.Use a terminal application such as TeraTerm or HyperTerminal with these setup parameters.
36.Use PSoC Designer as described in
37.After programming the device, press Reset and vary the pot to see the result on the LCD as well
38.Save and close the project.
existing main.c.
code located in section
'Example_ADC_to_LCD_with_DAC_and_UART' Project.
❐
❐
❐
❐
❐
❐
❐
❐
the device.
as in the terminal application. View the DAC output on a scope or with an LED.
P0_1 to VR
P0_4 to Tx
P0_5 to Scope
Baud Rate: 38400
Data: 8-bit
Parity: none
Stop: 1bit
Flow Control: none
3.1.3.3
on page
→
CY8CKIT-001 PSoC Development Kit Guide, Doc. # 001-48651 Rev. **
Generate/Build
Programming My First PSoC Project on page 11
46
to the existing Counter8_1INT.asm.
→
lib
→
Library Source Files. Copy the example
3.1.3.2
on page
43
to program
to the
[+] Feedback