CY8CKIT-001 Cypress Semiconductor Corp, CY8CKIT-001 Datasheet - Page 75

• Manufacturer Part Number: CY8CKIT-001
• Description: KIT DEV FOR PSOC3/5
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC® CapSenser
• Type: MCUr

Specifications of CY8CKIT-001

• Contents: Board, CD, CY8C29 & CY8C38 Modules, MiniProg3 Programmer/Debugger, Power Supply
• Processor To Be Evaluated: CY8C29, CY8C38
• Interface Type: RS-232, USB, JTAG
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PSoC 1, PSoC 3 and PSoC 5
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2961

3.2.3.11
CY8CKIT-001 PSoC Development Kit Guide, Doc. # 001-48651 Rev. **
Connecting the Components Together
1. Connect a Logic High component (Component Catalog
2. Connect a Logic Low component (Component Catalog
3. Connect a Clock component (Component Catalog
4. Double click the Clock component to configure.
5. Configure the clock:
Figure 3-40. Clock Component Configuration
6. Using the Wire Tool
7. Right click the LED analog port, select the Shape menu option and then Flip Horizontal. This
8. When complete the schematic looks like
oe on TX_OUT
reset on the UART
DMA.
Configure Clock Tab
❐
❐
❐
❐
❐
allows the LED pin to line up with the analog buffer.
Name: DMAclock
Source: IMO (3.000 MHz)
Desired Frequency: 3 MHz
Leave remaining parameters set to their default values
Pin Mode: CMOS_Out
, connect tx (in the UART component) to o on the digital port (TX_OUT).
Figure
3-41.
→
System
→
→
Digital Logic
Digital Logic
→
Clock) to the clock on the
→
→
Logic Low) to the
Logic High) to the
Sample Projects
71
[+] Feedback