CY8CKIT-001 Cypress Semiconductor Corp, CY8CKIT-001 Datasheet - Page 81

• Manufacturer Part Number: CY8CKIT-001
• Description: KIT DEV FOR PSOC3/5
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC® CapSenser
• Type: MCUr

Specifications of CY8CKIT-001

• Contents: Board, CD, CY8C29 & CY8C38 Modules, MiniProg3 Programmer/Debugger, Power Supply
• Processor To Be Evaluated: CY8C29, CY8C38
• Interface Type: RS-232, USB, JTAG
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PSoC 1, PSoC 3 and PSoC 5
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2961

3.2.4
3.2.4.1
3.2.4.2
CY8CKIT-001 PSoC Development Kit Guide, Doc. # 001-48651 Rev. **
Figure 3-43. HyperTerminal Settings
9. Use PSoC Creator as described in
10.After programming the device, press the Reset button on the PSoC Development Board to see
11. Save and close the project.
USB HID
This project demonstrates a simple HID keyboard. The firmware begins enabling global interrupts,
setting up the button (SW), and initializing USB for 3V operation. The firmware, after allowing the
HID device to enumerate, continuously checks for a button press to see if it needs to send the
keyboard key sequences for the Cypress website.
Creating USB HID Project
1. Open PSoC Creator.
2. Create a new project by clicking on Create New Project… in the Start Page of PSoC Creator.
3. In the New Project window, select the Empty PSoC3 Design template and Name the project
4. In Location, type the path where you want to save the project, or click
5. By default, the design window opens TopDesign.cysch. This is the project's schematic entry file
Placing and Configuring USBFS
1. Drag-and-drop a USBFS component from the Components Catalog to the workspace.
2. Double click the USBFS_1 component.
3. Name the component USBFS.
4. Select the HID Descriptor tab.
the output of the ADC displayed on the LCD and in the terminal application. LED1 is a sine wave
output whose period is based on the ADC. Turning the potentiometer results in the LCD and
observed terminal value change.
Ex4_USB_HID.
appropriate directory.
within PSoC Creator.
Programming a Device on page 15
to program the device.
and navigate to the
Sample Projects
77
[+] Feedback