DSPIC33FJ32GS406-I/PT Microchip Technology, DSPIC33FJ32GS406-I/PT Datasheet - Page 239

• Manufacturer Part Number: DSPIC33FJ32GS406-I/PT
• Description: IC MCU/DSP 32KB FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS406-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SCI, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Core Frequency: 40MHz
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 53
• Flash Memory Size: 32KB
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 16-12: PDCx: PWM GENERATOR DUTY CYCLE REGISTER
REGISTER 16-13: SDCx: PWM SECONDARY DUTY CYCLE REGISTER
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: In Independent PWM mode, the PDCx register controls the PWMxH duty cycle only. In
Note 1: The SDCx register is used in Independent PWM mode only. When used in Independent PWM mode, the
R/W-0
R/W-0
R/W-0
R/W-0
2: The smallest pulse width that can be generated on the PWM output corresponds to a value of 0x0008,
3: As the Duty Cycle gets closer to 0% or 100% of the PWM Period (0 to 40 ns, depending on the mode of
2: The smallest pulse width that can be generated on the PWM output corresponds to a value of 0x0008,
3: As the Duty Cycle gets closer to 0% or 100% of the PWM Period (0 to 40 ns, depending on the mode of
the Complementary, Redundant and Push-Pull PWM modes, the PDCx register controls the duty cycle of
both the PWMxH and PWMxL.
while the maximum pulse width generated corresponds to a value of Period - 0x0008.
operation), PWM Duty Cycle resolution will increase from 1 to 3 LSBs.
SDCx register controls the PWMxL duty cycle.
while the maximum pulse width generated corresponds to a value of Period - 0x0008.
operation), PWM Duty Cycle resolution will increase from 1 to 3 LSBs.
PDCx<15:0>: PWM Generator # Duty Cycle Value bits
SDCx<15:0>: Secondary Duty Cycle bits for PWMxL Output Pin
R/W-0
R/W-0
R/W-0
R/W-0
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
Preliminary
PDCx<15:8>
SDCx<15:8>
PDCx<7:0>
SDCx<7:0>
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
x = Bit is unknown
x = Bit is unknown
R/W-0
R/W-0
R/W-0
R/W-0
DS70591C-page 239
R/W-0
R/W-0
R/W-0
R/W-0
bit 8
bit 0
bit 8
bit 0