DSPIC33FJ32GS406-I/PT Microchip Technology, DSPIC33FJ32GS406-I/PT Datasheet - Page 265

• Manufacturer Part Number: DSPIC33FJ32GS406-I/PT
• Description: IC MCU/DSP 32KB FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS406-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SCI, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Core Frequency: 40MHz
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 53
• Flash Memory Size: 32KB
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

19.0
The Inter-Integrated Circuit (I
complete hardware support for both Slave and
Multi-Master modes of the I
standard with a 16-bit interface.
The I
• The SCLx pin is clock.
• The SDAx pin is data.
The I
• I
• I
• I
• I
• Serial clock synchronization for I
• I
 2010 Microchip Technology Inc.
modes of operation.
10-bit addressing.
10-bit addressing.
master and slaves.
used as a handshake mechanism to suspend and
resume serial transfer (SCLREL control).
collision and arbitrates accordingly.
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
2
2
2
2
2
Note 1: This data sheet summarizes the features
C interface supporting both Master and Slave
C Slave mode supports 7-bit and
C Master mode supports 7-bit and
C port allows bidirectional transfers between
C supports multi-master operation, detects bus
2
2
C module has a 2-pin interface:
C module offers the following key features:
2: Some registers and associated bits
INTER-INTEGRATED CIRCUIT
(I
2
C™)
of the dsPIC33FJ32GS406/606/608/610
and
families of devices. It is not intended to be
a comprehensive reference source. To
complement the information in this data
sheet, refer to Section 19. “Inter-Inte-
grated Circuit (I
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip web site (www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
dsPIC33FJ64GS406/606/608/610
2
2
C serial communication
C™)” (DS70195) in the
2
C) module provides
2
C port can be
Preliminary
19.1
The hardware fully implements all the master and slave
functions of the I
specifications, as well as 7-bit and 10-bit addressing.
The I
master on an I
The following types of I
• I
• I
• I
For details about the communication sequence in each
of these modes, refer to the “dsPIC33F/PIC24H Family
Reference Manual”. Please see the Microchip web site
(www.microchip.com) for the latest “dsPIC33F/PIC24H
Family Reference Manual” sections.
19.2
I2CxCON and I2CxSTAT are control and STATUS
registers, respectively. The I2CxCON register is
readable and writable. The lower six bits of I2CxSTAT
are read-only. The remaining bits of the I2CSTAT are
read/write:
• I2CxRSR is the shift register used for shifting data
• I2CxRCV is the receive buffer and the register to
• I2CxTRN is the transmit register to which bytes
• The I2CxADD register holds the slave address.
• A Status bit, ADD10, indicates 10-Bit Address
• The I2CxBRG acts as the Baud Rate Generator
In receive operations, I2CxRSR and I2CxRCV together
form a double-buffered receiver. When I2CxRSR
receives a complete byte, it is transferred to I2CxRCV,
and an interrupt pulse is generated.
internal to the module and the user application
has no access to it.
which data bytes are written, or from which data
bytes are read.
are written during a transmit operation.
mode.
(BRG) reload value.
2
2
2
C slave operation with 7-bit addressing
C slave operation with 10-bit addressing
C master operation with 7-bit or 10-bit addressing
2
C module can operate either as a slave or a
Operating Modes
I
2
C Registers
2
C bus.
2
C Standard and Fast mode
2
C operation are supported:
DS70591C-page 265