PIC18F87J11-I/PT Microchip Technology, PIC18F87J11-I/PT Datasheet - Page 144

• Manufacturer Part Number: PIC18F87J11-I/PT
• Description: IC PIC MCU FLASH 64KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F87J11-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Ram Size: 3930 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 15x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3904 B
• Interface Type: EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 68
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 15-ch x 10-bit
• Package: 80TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164136 - DEVELOPMENT KIT FOR PIC18AC162091 - HEADER MPLAB ICD2 18F87J11 64/80MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11AC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F87J11 FAMILY
10.7
PORTF is a 7-bit wide, bidirectional port. Only pin 7 of
PORTF has no analog input; it is the only pin that can
tolerate voltages up to 5.5V.
All pins on PORTF are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
PORTF is multiplexed with analog peripheral functions.
RF1 through RF6 may also be used as analog input
channels for the A/D Converter. All pins may be used as
comparator inputs or outputs by setting the appropriate
bits in the CMCON register. To use RF<6:3> as digital
inputs, it is also necessary to turn off the comparators.
DS39778D-page 144
Note 1: On device Resets, pins RF6:RF1 are
2: To configure PORTF as digital I/O, set the
PORTF, LATF and TRISF Registers
configured as analog inputs and are read
as ‘0’.
corresponding bits in ANCON0 and
ANCON1.
When Configuration bit, PMPMX = 0,
multiplexed with the Parallel Master Port data. This
multiplexing is available only in 80-pin devices.
EXAMPLE 10-6:
CLRF
CLRF
BSF
MOVLW C0h
MOVWF ANCON0
MOVLW 0Fh
MOVWF ANCON1
BCF
MOVLW CEh
MOVWF TRISF
PORTF
LATF
WDTCON,ADSHR ; Enable write/read to
WDTCON,ADSHR ; Disable write/read to
INITIALIZING PORTF
© 2009 Microchip Technology Inc.
; Initialize PORTF by
; clearing output
; data latches
; Alternate method to
; clear output latches
; the shared SFR
; make RF1:RF2 digital
;
; make RF<6:3> digital
;
; the shared SFR
;
; Set RF5:RF4 as outputs,
; RF<7:6>,<3:1> as inputs
PORTF is