PIC18F87J11-I/PT Microchip Technology, PIC18F87J11-I/PT Datasheet - Page 209

• Manufacturer Part Number: PIC18F87J11-I/PT
• Description: IC PIC MCU FLASH 64KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F87J11-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 80-TFQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Ram Size: 3930 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 15x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3904 B
• Interface Type: EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 68
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183032, DM183022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 15-ch x 10-bit
• Package: 80TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164136 - DEVELOPMENT KIT FOR PIC18AC162091 - HEADER MPLAB ICD2 18F87J11 64/80MA180020 - MODULE PLUG-IN HPC EXPL 18F87J11AC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

18.2
Except for the operation of the Special Event Trigger
discussed below, the Capture and Compare modes of
the ECCP module are identical in operation to that of
CCP4. These are discussed in detail in Section 17.2
“Capture
Mode”.
18.2.1
ECCP1 and ECCP2 incorporate an internal hardware
trigger that is generated in Compare mode on a match
between the CCPRx register pair and the selected
timer. This can be used in turn to initiate an action. This
mode is selected by setting CCPxCON<3:0> to ‘1011’.
The Special Event Trigger output of either ECCP1 or
ECCP2 resets the TMR1 or TMR3 register pair, depend-
ing on which timer resource is currently selected. This
allows the CCPRx register pair to effectively be a 16-bit
programmable period register for Timer1 or Timer3. In
addition, the ECCP2 Special Event Trigger will also start
an A/D conversion if the A/D module is enabled.
Special Event Triggers are not implemented for
ECCP3, CCP4 or CCP5. Selecting the Special Event
Trigger mode for these modules has the same effect as
selecting the Compare with Software Interrupt mode
(CCPxM3:CCPxM0 = 1010).
© 2009 Microchip Technology Inc.
Note:
Capture and Compare Modes
SPECIAL EVENT TRIGGER
The Special Event Trigger from ECCP2
will not set the Timer1 or Timer3 interrupt
flag bits.
Mode”
and
Section 17.3
“Compare
PIC18F87J11 FAMILY
18.3
When configured in Single Output mode, the ECCP
module functions identically to the standard CCP
module in PWM mode, as described in Section 17.4
“PWM Mode”. This is also sometimes referred to as
“Compatible
through 18-3.
Note:
Standard PWM Mode
operations, users are free to use either of
When setting up single output PWM
the processes described in Section 17.4.3
“Setup
Section 18.4.9 “Setup for PWM Opera-
tion”. The latter is more generic but will
work for either single or multi-output PWM.
CCP”
for
mode
PWM
as
DS39778D-page 209
Operation”
in
Tables 18-1
or