ST72F63BK4B1 STMicroelectronics, ST72F63BK4B1 Datasheet - Page 25

• Manufacturer Part Number: ST72F63BK4B1
• Description: IC MCU 8BIT 16K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F63BK4B1

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SCI, USB
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 12x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F6x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: I2C, SCI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 1
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7MDTU3-EPB/US, ST72F63B-SK/RAIS, ST7MDTU3-EMU3, STX-RLINK
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 8 Channel / 8 bit, 12 Channel
• For Use With: 497-5521 - EVAL BOARD LOW SPEED USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

ST7263Bxx
4.3.1
4.4
Readout protection
Readout protection, when selected, provides a protection against program memory content
extraction and against write access to Flash memory. Even if no protection can be
considered as totally unbreakable, the feature provides a very high level of protection for a
general purpose microcontroller.
In Flash devices, this protection is removed by reprogramming the option. In this case, the
entire program memory is first automatically erased and the device can be reprogrammed.
Readout protection selection depends on the device type:
●
●
Figure 8.
ICC interface
ICC (In-circuit communication) needs a minimum of four and up to six pins to be connected
to the programming tool (see
●
●
●
●
●
●
●
DFFFh
BFFFh
D7FFh
EFFFh
FFFFh
3FFFh
7FFFh
9FFFh
1000h
In Flash devices it is enabled and removed through the FMP_R bit in the option byte.
In ROM devices it is enabled by mask option specified in the Option List.
RESET: device reset
V
ICCCLK: ICC output serial clock pin
ICCDATA: ICC input/output serial data pin
ICCSEL/V
OSC1(or OSCIN): main clock input for external source (optional)
V
SS
DD
: device power supply ground
: application board power supply (see
4K
Memory map and sector address
PP
: programming voltage
8K
2 Kbytes
10K
Figure
Doc ID 7516 Rev 8
8 Kbytes
16K
9). These pins are:
4 Kbytes
4 Kbytes
16 Kbytes
24K
Figure
24 Kbytes
32K
9, Note 3)
40 Kbytes 52 Kbytes
48K
Flash program memory
60K
FLASH
MEMORY SIZE
SECTOR 2
SECTOR 1
SECTOR 0
25/186