MC908AZ60AVFUE Freescale Semiconductor, MC908AZ60AVFUE Datasheet - Page 268

• Manufacturer Part Number: MC908AZ60AVFUE
• Description: IC MCU 61K FLASH 8.4MHZ 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908AZ60AVFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8.4MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 52
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 15x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 64-QFP
• Processor Series: HC08AZ
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.4 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 8
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE, ZK-HC08AX-A, M68EM08AS/AZ60AE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 15 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MSCAN Controller (MSCAN08)
23.3 External Pins
The MSCAN08 uses two external pins, one input (RxCAN) and one output (TxCAN). The TxCAN output
pin represents the logic level on the CAN: 0 is for a dominant state, and 1 is for a recessive state.
A typical CAN system with MSCAN08 is shown in
Each CAN station is connected physically to the CAN bus lines through a transceiver chip. The
transceiver is capable of driving the large current needed for the CAN and has current protection against
defected CAN or defected stations.
23.4 Message Storage
MSCAN08 facilitates a sophisticated message storage system which addresses the requirements of a
broad range of network applications.
23.4.1 Background
Modern application layer software is built under two fundamental assumptions:
268
1. Any CAN node is able to send out a stream of scheduled messages without releasing the bus
2. The internal message queue within any CAN node is organized as such that the highest priority
between two messages. Such nodes will arbitrate for the bus right after sending the previous
message and will only release the bus in case of lost arbitration.
message will be sent out first if more than one message is ready to be sent.
MC68HC908AZ60A • MC68HC908AS60A • MC68HC908AS60E Data Sheet, Rev. 6
CAN_H
TXCAN
CAN NODE 1
TRANSCEIVER
CAN CONTROLLER
MCU
(MSCAN08)
Figure 23-1. The CAN System
RXCAN
CAN_L
C A N BUS
Figure
CAN STATION 1
CAN NODE 2
23-1.
CAN NODE N
Freescale Semiconductor