MC908AZ60AVFUE Freescale Semiconductor, MC908AZ60AVFUE Datasheet - Page 75

• Manufacturer Part Number: MC908AZ60AVFUE
• Description: IC MCU 61K FLASH 8.4MHZ 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908AZ60AVFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8.4MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 52
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 15x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 64-QFP
• Processor Series: HC08AZ
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.4 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 8
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE, ZK-HC08AX-A, M68EM08AS/AZ60AE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 15 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.4.5 EEPROM-1 Programming and Erasing
The unprogrammed or erase state of an EEPROM bit is a logic 1. The factory default for all bytes within
the EEPROM-1 array is $FF.
The programming operation changes an EEPROM bit from logic 1 to logic 0 (programming cannot change
a bit from logic 0 to a logic 1). In a single programming operation, the minimum EEPROM programming
size is one bit; the maximum is eight bits (one byte).
The erase operation changes an EEPROM bit from logic 0 to logic 1. In a single erase operation, the
minimum EEPROM erase size is one byte; the maximum is the entire EEPROM-1 array.
The EEPROM can be programmed such that one or multiple bits are programmed (written to a logic 0) at
a time. However, the user may never program the same bit location more than once before erasing the
entire byte. In other words, the user is not allowed to program a logic 0 to a bit that is already programmed
(bit state is already logic 0).
For some applications it might be advantageous to track more than 10K events with a single byte of
EEPROM by programming one bit at a time. For that purpose, a special selective bit programming
technique is available. An example of this technique is illustrated in
Note that none of the bit locations are actually programmed more than once although the byte was
programmed eight times.
When this technique is utilized, a program/erase cycle is defined as multiple program sequences (up to
eight) to a unique location followed by a single erase operation.
6.4.5.1 Program/Erase Using AUTO Bit
An additional feature available for EEPROM-1 program and erase operations is the AUTO mode. When
enabled, AUTO mode will activate an internal timer that will automatically terminate the program/erase
cycle and clear the EEPGM bit. Please see
Erasing, and
Freescale Semiconductor
Original state of byte (erased)
First event is recorded by programming bit position 0
Second event is recorded by programming bit position 1
Third event is recorded by programming bit position 2
Fourth event is recorded by programming bit position 3
Events five through eight are recorded in a similar fashion
6.5.1 EEPROM-1 Control Register
MC68HC908AZ60A • MC68HC908AS60A • MC68HC908AS60E Data Sheet, Rev. 6
Table 6-2. Example Selective Bit Programming Description
Description
6.4.5.2 EEPROM-1
for more information.
Programming,
Program Data
Table
1111:1110
1111:1101
1111:1011
1111:0111
in Binary
n/a
6-2.
6.4.5.3 EEPROM-1
1111:1111
1111:1110
1111:1100
1111:1000
1111:0000
Functional Description
in Binary
Result
75