HD6417727F100V Renesas Electronics America, HD6417727F100V Datasheet - Page 220

• Manufacturer Part Number: HD6417727F100V
• Description: MPU 3V 16K PB-FREE 240-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100V

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 6 X/Y Memory
6.2
The X/Y memory can be located in either map-enabled area or fixed-mapped area, depending on
the mode bit (MD) and DSP bit (DSP) setting in the status register (SR). Figure 6.1 shows X/Y
memory logical mapping.
1. Privileged Mode
2. User Mode
3. Privileged-DSP Mode
4. User-DSP Mode
It is recommended that for the mappable area, the C (cacheable) bit in the TLB entry must be set
to 0 to guarantee a two-cycle access.
Mapping through TLB translation provides a flexible X/Y memory addressing scheme but takes
two cycles even when the C bit in the TLB entry is cleared to 0. Fixed mapping provides a one-
cycle access for read and two-cycle access for write, which is the appropriate method for mission-
critical realtime operations.
Rev.6.00 Mar. 27, 2009 Page 162 of 1036
REJ09B0254-0600
MD = 1, DSP = 0; Any physical address in space P0 or P3 can map to X/Y memory through
TLB translation. Addresses ranging from H'A500 0000 to H'A5FF FFFF in the P2 space can
also fixed map to X/Y memory. Since the DSP extension is disabled, the DSP instruction set
and registers are not available to the programmer.
MD = 0, DSP = 0; Any physical address in the U0 space can access X/Y memory through TLB
translation. Any access to addresses beyond the U0 space will cause an address error. Since the
DSP extension is disabled, the DSP instruction set and registers are not available to the
programmer.
MD = 1, DSP = 1; Any physical address in space P0 or P3 can map to X/Y memory through
TLB translation. Addresses ranging from H'A500 0000 to H'A5FF FFFF in the P2 space can
also fixed-map to X/Y memory. Since the DSP extension is enabled, the DSP instruction set
and registers are available to the programmer.
MD = 0, DSP = 1; Any physical address in space U0 can map to X/Y memory through TLB
translation. Addresses ranging from H'A500 0000 to H'A5FF FFFF in the Uxy spaces can also
fixed map to X/Y memory. Any access to outside of U0 and Uxy space will cause an address
error. Since the DSP extension is enabled, the DSP instruction set and registers are available to
the programmer.
X/Y Memory Access from the CPU