UPD78F0533AGB-GAH-AX Renesas Electronics America, UPD78F0533AGB-GAH-AX Datasheet - Page 81

• Manufacturer Part Number: UPD78F0533AGB-GAH-AX
• Description: MCU 8BIT 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2r

Specifications of UPD78F0533AGB-GAH-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 55
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2
2.2.3 P20 to P27 (port 2)
Note This is not mounted onto 38-pin products of the 78K0/KC2. For the 38-pin products, be sure to set bits 6 and 7 of
Remark √: Mounted, −: Not mounted
(1) Port mode
(2) Control mode
R01UH0008EJ0401 Rev.4.01
Jul 15, 2010
P20/ANI0
P21/ANI1
P22/ANI2
P23/ANI3
P24/ANI4
P25/ANI5
P26/ANI6
P27/ANI7
P20 to P27 function as an I/O port. These pins also function as pins for A/D converter analog input.
The following operation modes can be specified in 1-bit units.
P20 to P27 function as an I/O port. P20 to P27 can be set to input or output port in 1-bit units using port mode
register 2 (PM2).
P20 to P27 function as A/D converter analog input pins (ANI0 to ANI7). When using these pins as analog input pins,
see (5) ANI0/P20 to ANI7/P27 in 13.6 Cautions for A/D Converter.
Caution ANI0/P20 to ANI7/P27 are set in the analog input mode after release of reset.
PM2 to “1”, and bits 6 and 7 of P2 to “0”.
78K0/KB2
√
√
√
√
−
−
−
−
78K0/KC2
√
√
Note
Note
√
√
√
√
√
√
78K0/KD2
whose flash
memory is
less than
Products
32 KB
78K0/KE2
√
√
√
√
√
√
√
√
CHAPTER 2 PIN FUNCTIONS
memory is at
whose flash
Products
48 KB
least
78K0/KF2
81