LIS3LV02DL STMicroelectronics, LIS3LV02DL Datasheet - Page 27

• Manufacturer Part Number: LIS3LV02DL
• Description: Board Mount Accelerometers MEMS INERTIAL SENSOR
• Manufacturer: STMicroelectronics

Specifications of LIS3LV02DL

• Sensing Axis: X, Y, Z
• Acceleration: 2 g, 6 g
• Digital Output - Number Of Bits: 12 bit, 16 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.16 V
• Supply Current: 0.65 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Digital Output - Bus Interface: I2C, SPI
• Sensitivity: 1024 LSB/g
• Package / Case: LGA-16
• Output Type: Digital
• Acceleration Range: ±2g, ±6g
• No. Of Axes: 3
• Interface Type: I2C, SPI
• Sensitivity Per Axis: 1024LSB / G
• Sensor Case Style: LGA
• No. Of Pins: 16
• Supply Voltage Range: 2.16V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LIS3LV02DL
5.2.3
SPI Read in 3-wires mode
3-wires mode is entered by setting to ‘1’ bit SIM (SPI Serial Interface Mode selection) in
CTRL_REG2.
Figure 11. SPI read protocol in 3-wires mode
The SPI Read command is performed with 16 clock pulses:
bit 0: READ bit. The value is 1.
bit 1: MS bit. When 0 do not increment address, when 1 increment address in multiple
reading.
bit 2-7: address AD(5:0). This is the address field of the indexed register.
bit 8-15: data DO(7:0) (read mode). This is the data that will be read from the device (MSb
first).
Multiple read command is also available in 3-wires mode.
SDI/O
SPC
CS
RW
MS
AD5 AD4 AD3 AD2 AD1 AD0
DO7 DO6 DO5 DO4 DO3 DO2 DO1 DO0
Digital interfaces
27/48