LIS3LV02DL STMicroelectronics, LIS3LV02DL Datasheet - Page 34

• Manufacturer Part Number: LIS3LV02DL
• Description: Board Mount Accelerometers MEMS INERTIAL SENSOR
• Manufacturer: STMicroelectronics

Specifications of LIS3LV02DL

• Sensing Axis: X, Y, Z
• Acceleration: 2 g, 6 g
• Digital Output - Number Of Bits: 12 bit, 16 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.16 V
• Supply Current: 0.65 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Digital Output - Bus Interface: I2C, SPI
• Sensitivity: 1024 LSB/g
• Package / Case: LGA-16
• Output Type: Digital
• Acceleration Range: ±2g, ±6g
• No. Of Axes: 3
• Interface Type: I2C, SPI
• Sensitivity Per Axis: 1024LSB / G
• Sensor Case Style: LGA
• No. Of Pins: 16
• Supply Voltage Range: 2.16V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Register description
7.10
7.11
7.12
34/48
CTRL_REG3 (22h)
Table 34.
Table 35.
FDS bit enables (FDS=1) or bypass (FDS=0) the high pass filter in the signal chain of the
sensor.
CFS1, CFS0 bits defines the coefficient Hpc to be used to calculate the -3dB cut-off
frequency of the high pass filter:
HP_FILTER_RESET (23h)
Dummy register. Reading at this address zeroes instantaneously the content of the internal
high pass-filter. Read data is not significant.
STATUS_REG (27h)
Table 36.
Table 37.
ECK
HPDD
HPFF
FDS
CFS1, CFS0
ZYXOR
ZOR
YOR
XOR
ECK
ZYXOR
Register (22h)
Register description (22h)
Register (27h)
Register description (27h)
HPDD
External Clock. Default value: 0
(0: clock from internal oscillator; 1: clock from external pad)
High Pass filter enabled for Direction Detection. Default value: 0
(0: filter bypassed; 1: filter enabled)
High Pass filter enabled for Free-Fall and Wake-Up. Default value: 0
(0: filter bypassed; 1: filter enabled)
Filtered Data Selection. Default value: 0
(0: internal filter bypassed; 1: data from internal filter)
High-pass filter Cut-off Frequency Selection. Default value: 00
(00: Hpc=512
01: Hpc=1024
10: Hpc=2048
11: Hpc=4096)
X, Y and Z axis Data Overrun
Z axis Data Overrun
Y axis Data Overrun
X axis Data Overrun
ZOR
HPFF
YOR
f
cutoff
FDS
XOR
=
0.318
-------------- -
Hpc
ZYXDA
res
⋅
ODRx
---------------- -
res
2
ZDA
CFS1
YDA
LIS3LV02DL
CFS0
XDA