S25FL016K0XMFI041 Spansion Inc., S25FL016K0XMFI041 Datasheet - Page 3

• Manufacturer Part Number: S25FL016K0XMFI041
• Description: MEMORY, FLASH, 16M, 3V, SPI, 8SOIC
• Manufacturer: Spansion Inc.

Specifications of S25FL016K0XMFI041

• Memory Size: 16Mbit
• Clock Frequency: 104MHz
• Supply Voltage Range: 2.7V To 3.6V
• Memory Case Style: SO
• No. Of Pins: 8
• Operating Temperature Range: -40°C To +85°C
• Interface: SPI
• Memory Type: RoHS Compliant
• Memory Configuration: 8K X 256 Bytes
• Interface Type: SPI
• Rohs Compliant: Yes

Distinctive Characteristics
This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qual-
ification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document
may be revised by subsequent versions or modifications due to changes in technical specifications.
Architectural Advantages
 Single power supply operation
 Memory architecture
 Program
 Erase
 Cycling endurance
 Data retention
 Process technology
 Package option
S25FL016K
16-Mbit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Multi I/O Bus
Data Sheet (Preliminary)
– Full voltage range: 2.7 to 3.6V read and write operations
– Uniform 4 KB sectors
– 256-byte page size
– Page Program (up to 256 bytes) in 0.7 ms (typical)
– Program operations are on a page by page basis
– Quad Page Programming
– Bulk erase function
– Uniform sector erase (4 KB)
– Uniform block erase (32 KB and 64 KB)
– Erase/Program Suspend and Resume
– 100,000 erase/program cycles typical
– 20-year data retention typical
– Manufactured on 0.09 µm process technology
– Industry Standard Pinouts
– 8-pin SO package (150 mils)
– 8-pin SO package (208 mils)
Publication Number S25FL016K_00
Revision 02
Performance Characteristics
 Speed
 Low Power Consumption
 Efficient “Continuous Read Mode”
Memory Protection Features
 Advanced security features
– Normal READ (Serial): 50 MHz clock rate
– FAST_READ (Serial): 104 MHz clock rate (maximum)
– 104 MHz DUAL SPI/Quad SPI clocks
– 208/416 MHz equivalent Dual/Quad SPI
– 52 MB/s continuous data transfer rate
– 4 mA active current, <1 µA in Deep Power-down mode (typical)
– Industrial temperature range (–40°C to +85°C)
– Low Instruction overhead
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
– Software and Hardware Write-Protect
– Top/Bottom, 4 KB complement array protection
– Power Supply Lock-Down and OTP protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Registers
– 3x 256-Byte Security Registers with OTP locks
– Volatile and Non-volatile Status Register Bits
Issue Date September 8, 2010