GRM155R60J225ME15D Murata, GRM155R60J225ME15D Datasheet - Page 59

• Manufacturer Part Number: GRM155R60J225ME15D
• Manufacturer: Murata

Specifications of GRM155R60J225ME15D

• Tolerance (+ Or -): 20%
• Voltage: 6.3VDC
• Temp Coeff (dielectric): X5R
• Operating Temp Range: -55C to 85C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 1mm
• Product Depth (mm): 0.5mm
• Product Height (mm): 0.5mm
• Product Diameter (mm): Not Requiredmm
• Capacitance: 2.2uF
• Package / Case: 0402
• Lead Free Status / RoHS Status: Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
No.
GRM Series Specifications and Test Methods (2) (Note1) Typical Inspection
1
2
3
4
5
6
7
8
9
Operating
Temperature
Range
Rated Voltage
Appearance
Dimensions
Dielectric Strength
Insulation
Resistance
Capacitance
Dissipation Factor
(D.F.)
Capacitance
Temperature
Characteristics
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Specifications and Test Methods (2) (Note1) Typical Inspection
Item
No bias
50% of
the Rated
Voltage
B1, B3, F1: –25 to +85 C
R1, R7, C7, D7, E7: –55 to +125 C
C6, R6: –55 to +85 C
F5: –30 to +85 C
C8, D8: –55 to +105 C,
See the previous pages.
No defects or abnormalities
Within the specified dimensions
No defects or abnormalities
More than 50 · F
Within the specified tolerance
B1, B3, R1, R6*, R7*, C7, C8, E7, D7: 0.1 max.
C6: 0.125 max.
D8: 0.15 max.
F1, F5: 0.2 max.
*GRM31CR71E106: 0.125 max.
B1, B3 : Within 10% (–25 to +85 C)
F1
R6
R1, R7 : Within 15% (–55 to +125 C)
F5
C6
C7
C8
D7
E7
D8
B1: Within +10/–30%
R1: Within +15/–40%
F1: Within +30/–95%
GRM31CR6 0J/0G 107: 0.15 max.
: Within +30/–80% (–25 to +85 C)
: Within 15% (–55 to +85 C)
: Within +22/–82% (–30 to +85 C)
: Within 22% (–55 to +85 C)
: Within 22% (–55 to +125 C)
: Within 22% (–55 to +105 C)
: Within +22/–33% (–55 to +125 C)
: Within +22/–56% (–55 to +125 C)
: Within +22/–33% (–55 to +105 C)
*Table 1
GRM21B
GRM21B
GRM155
GRM185
GRM185
GRM188
GRM188
GRM188
GRM219
GRM219
GRM319
In case Non "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
Specifications
B3/R6
B3/R6
C8/D7
B3/R6
R7/C8
B3/R6
B3/R6
B3/R6
R7/C8
B3/R6
C8
In case "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
Please refer to individual specifications (our product specifications or the approval sheet).
1C/1A
1C/1A
1C/1A
1C/1A
1C/1A
1A
1A
1A
1A
1A
1A
124 to 105
475, 106
105
105
225
225
335
475
106
106
106
(Note1) This Specifications and Test Methods indicates typical inspection.
Reference temperature: 25 C
(B1, B3, R1, F1: 20 C)
The rated voltage is defined as the maximum voltage which
may be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, V
whichever is larger, should be maintained within the rated
voltage range.
Visual inspection
Using calipers (GRM02 size is based on Microscope)
No failure should be observed when 250% of the rated voltage
is applied between the terminations for 1 to 5 seconds,
provided the charge/discharge current is less than 50mA.
The insulation resistance should be measured with a DC voltage
not exceeding the rated voltage at reference temperature and
75%RH max. and within 1 minutes of charging, provided the
charge/discharge current is less than 50mA.
The capacitance/D.F. should be measured at reference
temperature at the measuring frequency and voltage shown in
the table.
GRM188C80E106:
Perform a heat treatment at 150+0/-10 C for one hour and then
set for 24 2 hours at room temperature.
The capacitance change should be measured after 5 min. at
each specified temp. stage.
The ranges of capacitance change compared with the
reference temperature value over the temperature ranges
shown in the table should be within the specified ranges.*
In case of applying voltage, the capacitance change should be
measured after 1 more min. with applying voltage in
equilibration of each temp. stage.
*GRM32DR60J226, GRM43 B1/B3/R6 0J/1A 336/476 only: 1.0 0.2Vrms
•Initial measurement for high dielectric constant type
Perform a heat treatment at 150 +0/–10 C for one hour and
then set for 24 2 hours at room temperature.
Perform the initial measurement.
Step
Nominal Capacitance
CV10 F (10V min.)*
CV10 F (6.3V max.)
CG10 F
*For items in Table1
1
2
3
4
5
6
7
8
25 2 (for R6, R7, C6, C7, C8, D7, D8, E7, F5)
20 2 (for B1, B3, F1, R1)
–55 3 (for R1, R6, R7, C6, C7, C8, D7, D8, E7)
–30 3 (for F5)
–25 3 (for B1, B3, F1)
25 2 (for R6, R7, C6, C7, C8, D7, D8, E7, F5)
20 2 (for B1, B3, F1, R1)
125 3 (for R1, R7, C7, D7, E7)
105 3 (for C8, D8)
85 3 (for B1, B3, F1, F5, R6, C6)
20 2 (for B1, F1, R1)
–55 3 (for R1)
–25 3 (for B1, F1)
20 2 (for B1, F1, R1)
125 3 (for R1)
85 3 (for B1, F1)
Temperature ( C)
Test Method
Measuring Frequency
120 24Hz
1 0.1kHz
1 0.1kHz
1 0.1kHz
Continued on the following page.
Measuring Voltage
1.0 0.2Vrms
0.5 0.1Vrms
0.5 0.1Vrms
0.5 0.1Vrms
Applying Voltage (V)
rated voltage
50% of the
No bias
P-P
or V
O-P
C02E.pdf
57
,
09.9.18
1