SGP30N60 Infineon Technologies, SGP30N60 Datasheet - Page 12

• Manufacturer Part Number: SGP30N60
• Description: IGBT 600V 30A TO-263
• Manufacturer: Infineon Technologies

Specifications of SGP30N60

• Package / Case: TO-263-2, D²Pak (2 leads + Tab), TO-263AB
• Igbt Type: NPT
• Voltage - Collector Emitter Breakdown (max): 600V
• Vce(on) (max) @ Vge, Ic: 2.4V @ 15V, 30A
• Current - Collector (ic) (max): 41A
• Power - Max: 250W
• Input Type: Standard
• Mounting Type: Through Hole
• Configuration: Single
• Collector- Emitter Voltage Vceo Max: 600 V
• Maximum Gate Emitter Voltage: +/- 20 V
• Maximum Operating Temperature: + 150 C
• Continuous Collector Current Ic Max: 41 A
• Minimum Operating Temperature: - 55 C
• Mounting Style: Through Hole
• Switching Frequency: Fast IGBT 10-40 kHz
• Package: TO-220
• Vce (max): 600.0 V
• Ic(max) @ 25°: 41.0 A
• Ic(max) @ 100°: 30.0 A
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Other names: SGP30N60IN

SGP30N60,
SGB30N60
SGW30N60
Published by
Infineon Technologies AG,
Bereich Kommunikation
St.-Martin-Strasse 53,
D-81541 München
© Infineon Technologies AG 2000
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of
that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or
systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
12
Jul-02