WM8976GEFL/V Wolfson Microelectronics, WM8976GEFL/V Datasheet - Page 69

• Manufacturer Part Number: WM8976GEFL/V
• Description: Audio CODECs Mono ADC Stereo DAC with Spkr
• Manufacturer: Wolfson Microelectronics

Specifications of WM8976GEFL/V

• Mounting Style: SMD/SMT
• Package / Case: QFN-32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Production Data
w
Table 54 Audio Interface Control
ADCLRSWAP bit controls whether the ADC data appears in the right or left phase of the LRC clock
as defined for each audio format. Similarly, DACLRSWAP can be used to swap the left DAC data
from the left phase to the right phase of the LRC clock and the right DAC data from the right phase to
the left phase of the LRC clock.
Note: Right Justified Mode will only operate with a maximum of 24 bits. If 32-bit mode is selected, the
device will operate in 24-bit mode.
AUDIO INTERFACE CONTROL
The register bits controlling audio format, word length and master / slave mode are summarised
below. The audio interfaces can be controlled individually.
Register bit MS selects audio interface operation in master or slave mode. In Master mode BCLK,
and LRC are outputs. The frequency of BCLK in master mode are controlled with BCLKDIV. These
are divided down versions of master clock.
R4
Audio
Interface
Control
REGISTER
ADDRESS
0
1
2
4:3
6:5
7
8
BIT
DACMONO
ADCLRSWAP
DACLRSWAP
FMT
WL
LRP
BCP
LABEL
0
0
0
10
10
DEFAULT
Selects between stereo and mono DAC
operation:
0=Stereo device operation
1=Mono device operation. DAC data
appears in ‘left’ phase of LRC
Controls whether ADC data appears in
‘right’ or ‘left’ phases of LRC clock:
0=ADC data appear in ‘left’ phase of
LRC
1=ADC data appears in ‘right’ phase of
LRC
Controls whether DAC data appears in
‘right’ or ‘left’ phases of LRC clock:
0=DAC data appear in ‘left’ phase of
LRC
1=DAC data appears in ‘right’ phase of
LRC
Audio interface Data Format Select:
00=Right Justified
01=Left Justified
10=I
11= DSP/PCM mode
Word length
00=16 bits
01=20 bits
10=24 bits
11=32 bits (see note)
right, left and i2s modes – LRCLK
polarity
1 = invert LRCLK polarity
0 = normal LRCLK polarity
DSP Mode – mode A/B select
1 = MSB is available on 1st BCLK rising
edge after LRC rising edge (mode B)
0 = MSB is available on 2nd BCLK rising
edge after LRC rising edge (mode A)
BCLK polarity
0=normal
1=inverted
2
S format
DESCRIPTION
PD Rev 4.4 July 2009
WM8976
69