WM9713LGEFL/RV Wolfson Microelectronics, WM9713LGEFL/RV Datasheet - Page 48

Audio CODECs Stereo AC'97 CODEC T/P Interface

WM9713LGEFL/RV

Manufacturer Part Number
WM9713LGEFL/RV
Description
Audio CODECs Stereo AC'97 CODEC T/P Interface
Manufacturer
Wolfson Microelectronics
Datasheet

Specifications of WM9713LGEFL/RV

Number Of Adc Inputs
1
Number Of Dac Outputs
1
Conversion Rate
8 KSPs
Interface Type
AC97
Resolution
12 bit
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
QFN-48
Minimum Operating Temperature
- 25 C
Number Of Channels
1 ADC, 1 DAC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
WM9713LGEFL/RV
Manufacturer:
WOLFSON
Quantity:
20 000
WM9713L
w
MICROPHONE BIASING CIRCUIT
The MICBIAS output provides a low noise reference voltage suitable for biasing electret type
microphones and the associated external resistor biasing network. Refer to the Applications
Information section for recommended external components. The MICBIAS voltage can be altered via
MBVOL in register 22h.
MICBIAS=0.75*AVDD.
The microphone bias is driven to a dedicated MICBIAS pin 28 and is enabled by MPOP1EN in
register 22h. It can also be configured to drive out on GPIO8 pin 12 enabled by MPOP2EN in register
22h.
When not in use the microphone bias can be powered down using the Powerdown register bit
MICBIAS (register 3Eh, bit 14).
Table 24 Microphone Bias Voltage Control
The internal MICBIAS circuitry is shown in Figure 22. Note that the maximum source current
capability for MICBIAS is 3mA. The external biasing resistors therefore must be large enough to limit
the MICBIAS current to 3mA.
Figure 22 Microphone Bias Schematic
22h
REGISTER
ADDRESS
7
6
5
BIT
MBOP2EN
MBOP1EN
MBVOL
LABEL
When MBVOL=0, MICBIAS=0.9*AVDD and when MBVOL=1,
0 (Off)
1 (On)
0
DEFAULT
MICBIAS Output 2 Enable Control
1 = Enable MICBIAS output on GPIO8 (pin
12)
0 = Disable MICBIAS output on GPIO8 (pin
12)
MICBIAS Output 1 Enable Control
1 = Enable MICBIAS output on MICBIAS
(pin 28)
0 = Disable MICBIAS output on MICBIAS
(pin 28)
MICBIAS Output Voltage Control
1 = 0.75 x AVDD
0 = 0.9 x AVDD
DESCRIPTION
PP Rev 3.2 September 2008
Pre-Production
48

Related parts for WM9713LGEFL/RV