AMD-K6-IIIE+550ACR AMD (ADVANCED MICRO DEVICES), AMD-K6-IIIE+550ACR Datasheet - Page 284

• Manufacturer Part Number: AMD-K6-IIIE+550ACR
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of AMD-K6-IIIE+550ACR

• Lead Free Status / RoHS Status: Not Compliant

AMD-K6™-IIIE+ Embedded Processor Data Sheet
262
The states of the TAP controller are described as follows:
Test-Logic-Reset. This state represents the initial reset state of the
TAP controller and is entered when the processor samples
RESET asserted, when TRST# is asynchronously asserted, and
when TMS is sampled High for five or more consecutive clocks.
In addition, this state can be entered from the Select-IR-Scan
state. The IR is initialized with the IDCODE instruction, and
the processor’s normal operation is not affected in this state.
Capture-DR. During the SAMPLE/PRELOAD instruction, the
processor loads the BSR shift register with the current state of
every input, output, and bidirectional pin. During the EXTEST
instruction, the processor loads the BSR shift register with the
current state of every input and bidirectional pin.
Capture-IR. When the TAP controller enters the Capture-IR state,
the processor loads 01b into the two least significant bits of the
IR shift register and loads 000b into the three most significant
bits of the IR shift register.
Shift-DR. While in the Shift-DR state, the selected TDR shift
register is serially shifted toward the TDO pin. During the shift,
the most significant bit of the TDR is loaded from the TDI pin.
Shift-IR. While in the Shift-IR state, the IR shift register is
serially shifted toward the TDO pin. During the shift, the most
significant bit of the IR is loaded from the TDI pin.
Update-DR. During the SAMPLE/PRELOAD instruction, the BSR
output register is loaded with the contents of the BSR shift
register. During the EXTEST instruction, the output pins, as
well as those bidirectional pins defined as outputs, are driven
with their corresponding values from the BSR output register.
Update-IR. In this state, the IR output register is loaded from the
IR shift register, and the current instruction is defined by the
IR output register.
Preliminary Information
Test and Debug
23543A/0—September 2000
Chapter 13