EP1SGX40GF1020I6 Altera, EP1SGX40GF1020I6 Datasheet - Page 131

• Manufacturer Part Number: EP1SGX40GF1020I6
• Description: IC STRATIX GX FPGA 40K 1020-FBGA
• Manufacturer: Altera
• Series: Stratix® GXr

Specifications of EP1SGX40GF1020I6

• Number Of Logic Elements/cells: 41250
• Number Of Labs/clbs: 4125
• Total Ram Bits: 3423744
• Number Of I /o: 624
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1020-FBGA
• Family Name: Stratix GX
• Number Of Logic Blocks/elements: 41250
• # I/os (max): 624
• Frequency (max): 5GHz
• Process Technology: SRAM
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 41250
• Ram Bits: 3423744
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Altera Corporation
February 2005
Note to
(1)
Multiplier
Multiply-accumulator
Two-multipliers adder
Four-multipliers adder
Table 4–15. Multiplier Size & Configurations per DSP block
The number of supported multiply functions shown is based on signed/signed or unsigned/unsigned
implementations.
DSP Block Mode
Table
4–15:
For FIR filters, the DSP block combines the four-multipliers adder mode
with the shift register inputs. One set of shift inputs contains the filter
data, while the other holds the coefficients loaded in serial or parallel. The
input shift register eliminates the need for shift registers external to the
DSP block (that is, implemented in LEs). This architecture simplifies filter
design since the DSP block implements all of the filter circuitry.
One DSP block can implement an entire 18-bit FIR filter with up to four
taps. For FIR filters larger than four taps, DSP blocks can be cascaded with
additional adder stages implemented in LEs.
Table 4–15
DSP block mode according to size. These modes allow the DSP blocks to
implement numerous applications for DSP including FFTs, complex FIR,
FIR, and 2D FIR filters, equalizers, IIR, correlators, matrix multiplication
and many other functions.
DSP Block Interface
Stratix GX device DSP block outputs can cascade down within the same
DSP block column. Dedicated connections between DSP blocks provide
fast connections between the shift register inputs to cascade the shift
register chains. You can cascade DSP blocks for 9
filters larger than four taps, with additional adder stages implemented in
LEs. If the DSP block is configured as 36
accumulator stages are implemented in LEs. Each DSP block can route the
shift register chain out of the block to cascade two full columns of DSP
blocks.
Eight multipliers with
eight product outputs
Two multiply and
accumulate (52 bits)
Four sums of two
multiplier products each
Two sums of four
multiplier products each
9
shows the different number of multipliers possible in each
×
9
Four multipliers with four
product outputs
Two multiply and
accumulate (52 bits)
Two sums of two
multiplier products each
One sum of four multiplier
products each
18
Stratix GX Device Handbook, Volume 1
×
18
×
36 bits, the adder, subtractor, or
One multiplier with one
product output
×
–
–
–
Stratix GX Architecture
9- or 18
36
×
×
36
18-bit FIR
(1)
4–65