Z8018010PSG Zilog, Z8018010PSG Datasheet - Page 27

• Manufacturer Part Number: Z8018010PSG
• Description: IC 10MHZ Z180 CMOS ENH MPU 64DIP
• Manufacturer: Zilog

Specifications of Z8018010PSG

• Processor Type: Z180
• Features: 8-Bit, Enhanced Z80 Megacell
• Speed: 10MHz
• Voltage: 5V
• Mounting Type: Through Hole
• Package / Case: 64-DIP (0.750", 19.05mm)
• Processor Series: Z8018xx
• Core: Z80
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 10 MHz
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: 0 C
• Core Size: 8bit
• Cpu Speed: 10MHz
• Digital Ic Case Style: DIP
• No. Of Pins: 64
• Supply Voltage Range: 4.5V To 5.5V
• Operating Temperature Range: 0°C To +70°C
• Svhc: No SVHC (18-Jun-2010)
• Base Number: 8018010
• Rohs Compliant: Yes
• Clock Frequency: 10MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-3889; Z8018010PSG

12
ARCHITECTURE
UM005003-0703
Z8018x
Family MPU User Manual
Table 2.
The Z8X180 combines a high performance CPU core with a variety of
system and I/O resources useful in a broad range of applications. The CPU
core consists of five functional blocks: clock generator, bus state controller
(including dynamic memory refresh), interrupt controller, memory
management unit (MMU), and the central processing unit (CPU). The
integrated I/O resources make up the remaining four functional blocks:
•
•
Multiplexed
Pins
A18/TOUT
CKA0/
CKA1/
RXS/
Direct Memory Access (DMA) Control (2 channels)
Asynchronous Serial Communications Interface (ASCI, 2 channels),
CTS1
DREQ0
TEND0
Multiplexed Pin Descriptions
Descriptions
During RESET, this pin is initialized as A18 pin. If either
TOC1 or TOC0 bit of the Timer Control Register (TCR) is set
to 1, TOUT function is selected. If TOC1 and TOC0 bits are
cleared to 0, A18 function is selected.
During RESET, this pin is initialized as CKA
If either DM1 or SM1 in DMA Mode Register (DMODE) is
set to 1,
During RESET, this pin is initialized as CKA1 pin. If
CKA1D bit in ASCI control register ch 1 (CNTLA1) is set to
1,
CKA1 function is selected.
During RESET, this pin is initialized as RXS pin. If CTS1E bit
in ASCI status register ch 1 (STAT1) is set to 1,
is selected. If CTS1E bit is 0, RXS function is selected.
TEND0
DREQ0
function is selected. If CKA1D bit is set to 0,
function is always selected.
0
CTS1
pin.
function