PEB2256H-V12 Infineon Technologies, PEB2256H-V12 Datasheet - Page 143

• Manufacturer Part Number: PEB2256H-V12
• Description: IC INTERFACE LINE 3.3V 80-MQFP
• Manufacturer: Infineon Technologies

Specifications of PEB2256H-V12

• Applications: *
• Interface: *
• Voltage - Supply: *
• Package / Case: 80-SQFP
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PEB2256H-V12; PEB2256H-V12IN

5.2.5
Normally, this kind of multiframe structure only makes sense when using the CAS
robbed-bit signaling. The multiframe alignment signal is located at the FS-bit position of
every other frame (refer to
Table 34
Frame Number
1
2
3
4
5
6
7
8
9
10
11
12
There are two possibilities of remote alarm (yellow alarm) indication:
• Bit 2 = 0 in each time slot of a frame, selected with bit FMR0.SRAF = 0
• The last bit of the multiframe alignment signal (bit 1 of frame 12) changes from "0" to
5.2.5.1
In the synchronous state terminal framing (FT-bits) and multiframing (FS-bits) are
observed, independently. Further reaction on framing errors depends on the selected
synchronization/resynchronization procedure (by bit FMR2.SSP):
• FMR2.SSP = 0: terminal frame and multiframe synchronization are combined.
• FMR2.SSP = 1: terminal frame and multiframe synchronization are separated
Data Sheet
"1", selected with bit FMR0.SRAF = 1.
Two errors within 4/5/6 framing bits (by bits FMR4.SSC1/0) of one of the above leads
to the asynchronous state for terminal framing and multiframing. Additionally to the bit
FRS0.LFA, loss of multiframe alignment is reported by bit FRS0.LMFA.
The resynchronization procedure starts with synchronizing upon the terminal framing.
If the pulse framing has been regained, the search for multiframe alignment is
initiated. Multiframe synchronization has been regained after two consecutive correct
multiframe patterns have been received.
Two errors within 4/5/6 terminal framing bits lead to the same reaction as described
12-Frame Multiframe (D4 or SF Format, T1/J1)
Synchronization Procedure
12-Frame Multiframe Structure (T1/J1)
F
1
–
0
–
1
–
0
–
1
–
0
–
T
Table
34).
143
F
–
0
–
0
–
1
–
1
–
1
–
0
S
Functional Description T1/J1
Signaling Channel
Designation
A
B
FALC56 V1.2
PEB 2256
2002-08-27