PSB 2132 H V2.2 Infineon Technologies, PSB 2132 H V2.2 Datasheet - Page 2

• Manufacturer Part Number: PSB 2132 H V2.2
• Description: IC CODEC FILTER 2CHAN MQFP-64
• Manufacturer: Infineon Technologies
• Series: SICOFI®r

Specifications of PSB 2132 H V2.2

• Package / Case: 64-QFP
• Function: CODEC Filter
• Interface: IOM-2 PCM, SPI
• Number Of Circuits: 2
• Voltage - Supply: 5V
• Current - Supply: 18mA
• Power (watts): 90mW
• Mounting Type: Surface Mount
• Includes: Level Metering Function, Tone Generation
• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Interface Type: Serial
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Number Of Channels: 2
• Snr: 35.4 dB
• Supply Current: 40 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PSB2132HV2.2XT; SP000007696

Edition 2001-02-20
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
©
Infineon Technologies AG 2001.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address
list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.