EP4SGX180FF35C4N Altera Corporation, EP4SGX180FF35C4N Datasheet - Page 67

• Manufacturer Part Number: EP4SGX180FF35C4N
• Description: IC STRATIX IV FPGA 180K 1152FBGA
• Manufacturer: Altera Corporation
• Series: Stratix® IV GXr

Specifications of EP4SGX180FF35C4N

• Number Of Logic Elements/cells: 175750
• Number Of Labs/clbs: 7030
• Total Ram Bits: 13954048
• Number Of I /o: 564
• Number Of Gates: -
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-BBGA
• Lead Free Status: Lead free
• Rohs Status: RoHS Compliant

Chapter 1: DC and Switching Characteristics for Stratix IV Devices
Switching Characteristics
Table 1–45. DLL Frequency Range Specifications for Stratix IV Devices—Preliminary (Part 2 of 2)
December 2011 Altera Corporation
Note to
(1) Low indicates a 6-bit DQS delay setting; high indicates a 5-bit DQS delay setting.
Frequency
Mode
7
Table
1–45:
1
1
Speed Grade
470-700
–2/–2×
For the Stratix IV GT –1 and –2 speed grade specifications, refer to the –2/–2× speed
grade column. For the Stratix IV GT –3 speed grade specification, refer to the –3 speed
grade column.
Table 1–46
Table 1–46. DQS Phase Offset Delay Per Setting for Stratix IV Devices
For the Stratix IV GT –1 and –2 speed grade specifications, refer to the –2/–2× speed
grade column. For the Stratix IV GT –3 speed grade specification, refer to the –3 speed
grade column.
Table 1–47
Table 1–47. DQS Phase Shift Error Specification for DLL-Delayed Clock (t
Devices
Notes to
(1) The valid settings for phase offset are -64 to +63 for frequency modes 0 to 3 and -32 to +31 for frequency modes
(2) The typical value equals the average of the minimum and maximum values.
(3) The delay settings are linear, with a cumulative delay variation of 40 ps for all speed grades. For example, when
Note to
(1) This error specification is the absolute maximum and minimum error. For example, skew on three DQS delay
Number of DQS Delay
4 to 6.
using a –2 speed grade and applying a 10 phase offset settings to a 90° phase shift at 400 MHz, the expected
average cumulative delay is [625 ps + (10 × 10.5 ps) ± 20 ps] = 730 ps ± 20 ps.
buffers in a –2/–2x speed grade is ± 78 ps or ± 39 ps.
Frequency Range (MHz)
Table
Table
(Note 1)
Speed Grade
Buffer
Speed Grade
lists the DQS phase offset delay per stage for Stratix IV devices.
lists the DQS phase shift error for Stratix IV devices.
1–47:
1
2
3
4
–2/–2×
470-630
1–46:
–3
–4
–3
Speed Grade
470-590
–4
Speed Grade
–2/–2X
104
26
52
78
Stratix IV Device Handbook Volume 4: Device Datasheet and Addendum
Available Phase Shift
60°, 120°, 180°, 240°
Min
7
7
7
Speed Grade
112
–3
28
56
84
Max
13
15
16
DQS Delay Buffer
Speed Grade
Mode
(Note
DQS_PSERR
High
120
–4
30
60
90
1),
(1)
(2)
) for Stratix IV
,
Unit
(3)
ps
ps
ps
Number of
Chains
Unit
Delay
ps
ps
ps
ps
6
1–59