HD64F7047FW40V Renesas Electronics America, HD64F7047FW40V Datasheet - Page 269

• Manufacturer Part Number: HD64F7047FW40V
• Description: MCU 5V 256K I-TEMP,PB-FREE 100-Q
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047FW40V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Outline of Complementary PWM Mode Operation: In complementary PWM mode, 6-phase
PWM output is possible. Figure 10.34 illustrates counter operation in complementary PWM mode,
and Figure 10.35 shows an example of complementary PWM mode operation.
1. Counter Operation
Counter value
TGRA_3
H'0000
TCDR
TDDR
In complementary PWM mode, three countersTCNT_3, TCNT_4, and TCNTSperform
up/down-count operations.
TCNT_3 is automatically initialized to the value set in TDDR when complementary PWM
mode is selected and the CST bit in TSTR is 0.
When the CST bit is set to 1, TCNT_3 counts up to the value set in TGRA_3, then switches to
down-counting when it matches TGRA_3. When the TCNT3 value matches TDDR, the
counter switches to up-counting, and the operation is repeated in this way.
TCNT_4 is initialized to H'0000.
When the CST bit is set to 1, TCNT4 counts up in synchronization with TCNT_3, and
switches to down-counting when it matches TCDR. On reaching H'0000, TCNT4 switches to
up-counting, and the operation is repeated in this way.
TCNTS is a read-only counter. It need not be initialized.
When TCNT_3 matches TCDR during TCNT_3 and TCNT_4 up/down-counting, down-
counting is started, and when TCNTS matches TCDR, the operation switches to up-counting.
When TCNTS matches TGRA_3, it is cleared to H'0000.
When TCNT_4 matches TDDR during TCNT_3 and TCNT_4 down-counting, up-counting is
started, and when TCNTS matches TDDR, the operation switches to down-counting. When
TCNTS reaches H'0000, it is set with the value in TGRA_3.
TCNTS is compared with the compare register and temporary register in which the PWM duty
is set during the count operation only.
Figure 10.34 Complementary PWM Mode Counter Operation
TCNT_4
TCNTS
TCNT_3
Rev. 2.00, 09/04, page 227 of 720
TCNT_3
TCNT_4
TCNTS
Time