ATA6603P-PLQW Atmel, ATA6603P-PLQW Datasheet - Page 8

• Manufacturer Part Number: ATA6603P-PLQW
• Description: MCU W/LIN TXRX REG WTCHDG 48-QFN
• Manufacturer: Atmel
• Series: AVR® ATA66 LIN-SBCr

Specifications of ATA6603P-PLQW

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 48-QFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.3.14
Figure 3-2.
3.3.14.1
3.3.14.2
8
Communication: ON
VCC: 5V 2%/50 mA
with undervoltage
monitoring
ATA6602/ATA6603
Modes of Operation
Normal Mode
Normal Mode
Silent Mode
Modes of Operation
b
This is the normal transmitting and receiving mode. The voltage regulator is in Normal mode and
can source 50 mA. The undervoltage detection is activated. The watchdog needs a trigger
signal from PTRIG or NTRIG to avoid resets at NRES.
A falling edge at EN while TXD is high switches the IC into Silent mode. The TXD signal has to
be logic high during the Mode Select window (see
two independent outputs can be used, or two outputs from the same microcontroller port; in the
second case, the mode change is only one command. In Silent mode, the transmission path is
disabled. Supply current from V
The overall supply current from V
I
d
EN = 1
VDDs
.
TXD = 1
TXD = 0
EN = 0
EN = 1
EN = 0
VCC: 5V/50 mA with undervoltage
Communication: OFF
EN = 1
monitoring
Pre-normal Mode
Go to silent command
Go to sleep command
Unpowered Mode
Local wake-up event
Local wake-up event
b
V
Batt
= 0
a
Bat
Bat
is typically I
is the addition of 40 µA plus the V
c + e
Communication: OFF
VSsi
VCC: switched off
= 40 µA with no load at the VDD regulator.
Figure 3-3 on page
Sleep Mode
b
c + d + e
a: V
b: V
c: Bus wake-up event
d: NRES switches to low
e: Wake-up from wake-up switch
b
VCC: 5V 7%/50 mA
with undervoltage monitoring
Communication: OFF
S
S
> 5V
< 4V
Silent Mode
DD
9). For EN and TXD either
regulator output current
4921E–AUTO–09/09