ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 145

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Table 94. TIMER8_Status_Flag
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
TIMER8_Status_Flag
Bool TIMER8_Status_Flag(Timer8_Flag FLAG_F)
Checks the status of any one of the timer flags depending
upon the input parameter. The function can be called more
than once for checking more than one flag.
TIMER8_FLAG_F
where F can be OCF1, OCF2, ICF1, ICF2 or OVF.
F = OCF1
checks for OCF1 flag
F = OCF2
checks for OCF2 flag
F = ICF1
checks for ICF1 flag
F = ICF2
checks for ICF2 flag
F = OVF
check for OVF flag
TRUE or FALSE
If TRUE: flag is set.
If FALSE: flag is not set.
Timer8 must be configured in any one of the modes.
None
If TRUE, timer8 flag is set and can be cleared by calling
TIMER8_Clear_Flag.
If FALSE, timer8 flag is not set and this function can be
looped till the flag is set.
TIMER8_Clear_Flag
Function Descriptions
145/235