ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 66

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Function Descriptions
Table 35. SPI_IsTransmitCompleted
Notes:
– The above function is for SPI Polling and SPI Interrupt driven modes.
– In ‘SPI Polling’ mode, this function is called only after SPI_PutByte function.
66/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
1) These Parameters are returned in SPI Interrupt driven mode only.
SPI_IsTransmitCompleted
SPI_TxErrCode_t SPI_IsTransmitCompleted (void)
Checks for errors, checks for pending requests and re-
turns the transmission status.
None
SPI_TX_WCOL
If write collision error occurs.
SPI_TX_MODF
If master mode fault occurs.
SPI_TRANSMIT_OK
If there is no error in transmission and all data bytes are
transmitted.
SPI_TX_BUFFER_ONGOING
If all the data bytes from user buffer are not transmitted.
SPI_TX_STRING_ONGOING
If the complete string is not transmitted.
None
None
None
None
1)
1)