ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 173

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Table 117. LART_PWM_Mode
Notes:
– This function can be used only with ST7FLite0 devices.
– This function is used to keep backward compatibility with previous library. For new develop-
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Input Parameter 3
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
ment LART_ConfigurePWM function should be used with the first parameter LART_PWM0
in place of this function.
LART_PWM_Mode
Void LART_PWM_Mode(unsigned int
Autoreload_Value,Lart_Output POLARITY, unsigned int
Dutycycle_Data)
Generates PWM on PWM0 pin. The PWM signal frequen-
cy is controlled by the counter clock period and ATR reg-
ister value. The PWM signal duty cycle depends upon
input parameter 1 and input parameter 3.
This function is used only for Lite0 device, for other devic-
es use LART_ConfigurePWM.
Autoreload_Value
This value is loaded in autoreload register (ATR). You can
select this value from 0x000 to 0xFFF depending on the
frequency required for the PWM signal.
LART_POLARITY_0
PWM output level is low, for Counter value >
Dutycycle_Data,
PWM output level is high, for Counter value <=
Dutycycle_Data.
LART_POLARITY_1
PWM output level is high, for Counter value >
Dutycycle_Data,
PWM output level is low, for Counter value <=
Dutycycle_Data.
Dutycycle_Data
Data to be loaded in Duty cycle register (0x000 to 0xFFF).
Note: This value must be greater than the ATR register
value loaded through Input parameter 1 to obtain signal on
PWM0 pin.
None
LART_Init must have been called to select the counter
clock.
None
PWM signal of required frequency and duty cycle is gen-
erated at PWM0 pin. The output compare mode is disa-
bled.
LART_Init, LART_ConfigurePWM
Function Descriptions
173/235