ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 146

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Function Descriptions
Table 95. TIMER8_Mode_Disable
146/235
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
TIMER8_Mode_Disable
Void TIMER8_Mode_Disable(Timer8_Mode MODE_M)
Disables the timer8 mode depending upon the Input pa-
rameter passed. This function should be called more than
once in order to disable more than one mode.
TIMER8_MODE_M
where M can be 1, 2, 3, 4, 5, 6, 7, 8, 9.
M=1, Output compare1 mode (OCMP1 )
M=2, Output compare2 mode (OCMP2 )
M=3, Input capture1 mode (ICAP1 )
M=4, Input capture2 mode (ICAP2)
M=5, Pulse width modulation mode (PWM).
M=6, One pulse modulation mode (OPM)
M=7, Forced compare1 mode (FORCDCMP1)
M=8, Forced compare2 mode (FORCDCMP2)
M=9, Timer prescalar, counter and outputs disabled
None
Timer8 active in any of the modes.
None
Selected timer8 mode is disabled and the Corresponding
status flag is cleared.
None