ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 70

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Function Descriptions
Table 39. SPI_GetString
Note: The above function is only for SPI Interrupt driven mode.
Caution:
– Take care not to access the string until reception is complete.
– Any data received before calling this function is ignored.
– The data reception will stop if any error occurs during reception.
70/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
SPI_GetString
Starts reception of a data string in SPI Interrupt driven
mode in the interrupt service routine and stores it in a user
defined area.
*PtrToString
Start address of the location where the string is to be
placed.
None
1. The SPI should be configured correctly.
2. You must define SPI Interrupt driven reception mode
in ST7lib_config.h.
3. You must enable interrupts for this mode.
4. For SPI Interrupt driven mode, SPI_IT_Function must
have been called in the Interrupt service routine.
None
You must call SPI_IsReceptionCompleted after this, to
check the reception status.
SPI_IsReceptionCompleted, SPI_GetString (SPI Polling
mode)
Void SPI_GetString (unsigned char *PtrToString)