STR752FR2T6 STMicroelectronics, STR752FR2T6 Datasheet - Page 33

• Manufacturer Part Number: STR752FR2T6
• Description: MCU 32BIT 256KB FLASH 64-LQFP
• Manufacturer: STMicroelectronics
• Series: STR7r

Specifications of STR752FR2T6

• Core Processor: ARM7
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: CAN, I²C, SPI, SSI, SSP, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 38
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Processor Series: STR752x
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: CAN, I2C, SPI, SSI, SSP, USB
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 6
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWARM, EWARM-BL, KSDK-STR750-PLUS, MCBSTR750, MCBSTR750U, MCBSTR750UME, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: STR750-MCKIT, STR750-SK/HIT, STR750-SK/IAR, STR750-SK/KEIL, STR750-SK/RAIS, STR750-EVAL, STX-PRO/RAIS, STX-RLINK, STR79-RVDK/CPP, STR79-RVDK, STR79-RVDK/UPG
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• For Use With: MCBSTR750UME - BOARD EVAL MCBSTR750 + ULINK-MEMCBSTR750U - BOARD EVAL MCBSTR750 + ULINK2497-5754 - KIT STARTER IAR STR750497-5753 - KIT STARTER KEIL FOR STR7/STR9497-5752 - KIT STARTER IAR FOR STR7/STR9497-5748 - BOARD EVALUATION FOR STR750XF497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5653

STR750Fxx STR751Fxx STR752Fxx STR755Fxx
6.2.2
6.2.3
Current characteristics
Table 8.
1. The user can use GPIOs to source or sink high current (up to 20 mA for O8 type High Sink I/Os). In this
2. All 3.3 V or 5.0 V power (V
3. I
4. Negative injection disturbs the analog performance of the device. See note in
5. When several inputs are submitted to a current injection, the maximum ΣI
Thermal characteristics
Table 9.
I
INJ(PIN)
case, the user must ensure that these absolute max. values are not exceeded (taking into account the
RUN power consumption) and must follow the rules described in
on page
must always be connected to the external 3.3V or 5.0V supply.
cannot be respected, the injection current must be limited externally to the I
injection is induced by V
characteristics on page
positive and negative injected currents (instantaneous values). These results are based on
characterization with ΣI
ΣI
INJ(PIN)
I
I
VDD_IO
Symbol
Symbol
VSS_IO
INJ(PIN)
T
I
STG
T
IO
J
(3) & (4)
must never be exceeded. This is implicitly insured if V
54.
(1)
(1)
(3)
Current characteristics
Thermal characteristics
Total current into V
Total current out of V
Output current sunk by any I/O and control pin
Output current source by any I/Os and control pin
Injected current on NRSTIN pin
Injected current on XT1 and XT2 pins
Injected current on any other pin
Total injected current (sum of all I/O and control pins)
INJ(PIN)
72.
IN
>V
DD_IO
Maximum junction temperature
DD
Storage temperature range
maximum current injection on four I/O port pins of the device.
while a negative injection is induced by V
, V
DDA_ADC
DD_IO
Ratings
SS
, V
ground lines (sink)
power lines (source)
DDA_PLL
Ratings
) and ground (V
(5)
IN
maximum is respected. If V
Section 6.3.8: I/O port pin characteristics
(2)
(2)
SS_IO
INJ(PIN)
IN
<V
INJ(PIN)
, V
SS
Section 6.3.12: 10-bit ADC
SSA_ADC
(5)
-65 to +150
. Data based on T
is the absolute sum of the
Electrical parameters
value. A positive
Value
150
, V
Maximum
value
DDA_ADC
± 25
- 25
150
150
± 5
± 5
± 5
25
IN
maximum
A
) pins
=25°C.
Unit
Unit
°C
°C
mA
33/84