DF2345TE20 Renesas Electronics America, DF2345TE20 Datasheet - Page 524

• Manufacturer Part Number: DF2345TE20
• Description: MCU 5V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2345TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2345TE20; HD64F2345TE20

Section 13 Smart Card Interface
Serial Data Reception: Data reception in Smart Card mode uses the same processing procedure
as for the normal SCI. Figure 13.7 shows an example of the transmission processing flow.
[1] Perform Smart Card interface mode initialization as described above in Initialization.
[2] Check that the ORER flag and PER flag in SSR are cleared to 0. If either is set, perform the
[3] Repeat steps [2] and [3] until it can be confirmed that the RDRF flag is set to 1.
[4] Read the receive data from RDR.
[5] When receiving data continuously, clear the RDRF flag to 0 and go back to step [2].
[6] To end reception, clear the RE bit to 0.
Rev. 4.00 Feb 15, 2006 page 498 of 900
REJ09B0291-0400
appropriate receive error processing, then clear both the ORER and the PER flag to 0.
No
No
Figure 13.7 Example of Reception Processing Flow
RDRF flag in SSR to 0
Read RDR and clear
All data received?
Clear RE bit to 0
ORER = 0 and
Start reception
Initialization
RDRF = 1?
PER = 0
Start
Yes
Yes
Yes
No
Error processing