DF2166VTE33 Renesas Electronics America, DF2166VTE33 Datasheet - Page 575

• Manufacturer Part Number: DF2166VTE33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit
4
3
2
1
SWMF
C/D3
DBU32
IBF3A
Bit Name Initial Value Slave Host Description
0
0
0
0
R/(W)* R
R
R/W
R
R/W
R
R
R
Slave Write Mode Flag
Indicates that slave write mode is entered by writing
to TWR0 from the slave processor (this LSI). In the
event of simultaneous writes by the master and the
slave, the master write has priority.
0: [Clearing condition]
1: [Setting condition]
Command/Data
When the host processor writes to an IDR3 register,
bit 2 of the I/O address is written into this bit to
indicate whether IDR3 contains data or a command.
0: Content of input data register (IDR3) is data
1: Content of input data register (IDR3) is a
Defined by User
The user can use this bit as necessary.
Input Data Register Full
Indicates whether or not there is receive data in
IDR3. This is an internal interrupt source to the slave
processor (this LSI).
0: There is not receive data in IDR3
[Clearing condition]
When the slave processor reads IDR3
1: There is receive data in IDR3
[Setting condition]
When the host processor writes to IDR3 using I/O
write cycle
When the host processor reads TWR15 using I/O
read cycle, or the slave processor writes 0 to the
SWMF bit
command
When the slave processor writes to TWR0 while
MWMF = 0
Rev. 3.00, 03/04, page 533 of 830