DF2166VTE33 Renesas Electronics America, DF2166VTE33 Datasheet - Page 93

• Manufacturer Part Number: DF2166VTE33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.9
2.9.1
The TAS instruction is not generated by the Renesas H8S and H8/300 series C/C++ compilers.
The TAS instruction can be used as a user-defined intrinsic function.
2.9.2
The BSET, BCLR, BNOT, BST, and BIST instructions read data in byte units, manipulate the
data of the target bit, and write data in byte units. Special care is required when using these
instructions in cases where a register containing a write-only bit is used or a bit is directly
manipulated for a port.
In addition, the BCLR instruction can be used to clear the flag of the internal I/O register. In this
case, if the flag to be cleared has been set to 1 by an interrupt processing routine, the flag need not
be read before executing the BCLR instruction.
Usage Notes
Note on TAS Instruction Usage
Note on Bit Manipulation Instructions
Rev. 3.00, 03/04, page 51 of 830