DF2166VTE33 Renesas Electronics America, DF2166VTE33 Datasheet - Page 633

• Manufacturer Part Number: DF2166VTE33
• Description: MCU FLASH 3V 512K 33MHZ 144TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2166VTE33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

17.3
The D/A converter has the following registers.
• D/A data register 0 (DADR0)
• D/A data register 1 (DADR1)
• D/A control register (DACR)
17.3.1
DADR0 and DADR1 are 8-bit readable/writable registers that store data for D/A conversion.
When analog output is permitted, D/A data register contents are converted and output to analog
output pins.
17.3.2
DACR controls D/A converter operation.
Bit
7
6
5
4 to 0 
Bit Name Initial Value
DAOE1
DAOE0
DAE
Register Descriptions
D/A Data Registers 0 and 1 (DADR0, DADR1)
D/A Control Register (DACR)
0
0
0
All 1
R/W
R/W
R/W
R
R/W
Description
D/A Output Enable 1
Controls D/A conversion and analog output.
0: Analog output DA1 is disabled
1: D/A conversion for channel 1 and analog output DA1
D/A Output Enable 0
Controls D/A conversion and analog output.
0: Analog output DA0 is disabled
1: D/A conversion for channel 0 and analog output DA0
D/A Enable
Controls D/A conversion in conjunction with the DAOE0
and DAOE1 bits. When the DAE bit is cleared to 0, D/A
conversion for channels 0 and 1 are controlled
individually. When the DAE bit is set to 1, D/A conversion
for channels 0 and 1 are controlled as one. Conversion
result output is controlled by the DAOE0 and DAOE1
bits. For details, see table 17.2 below.
Reserved
The initial value should not be changed.
are enabled
are enabled
Rev. 3.00, 03/04, page 591 of 830