UPD70F3737GF-GAS-AX Renesas Electronics America, UPD70F3737GF-GAS-AX Datasheet - Page 433

• Manufacturer Part Number: UPD70F3737GF-GAS-AX
• Description: MCU 32BIT V850ES/JX3-L 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3737GF-GAS-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.4.7
time it is detected that a valid edge has been input to the TIQ0m pin, the value of the 16-bit counter is stored in the
TQ0CCRm register, and the 16-bit counter is cleared to 0000H.
signal (INTTQ0CCm) occurs.
TQ0IOC1 register for the unused pins.
In the pulse width measurement mode, TMQ0 starts incrementing when the TQ0CTL0.TQ0CE bit is set to 1. Each
The interval of the valid edge can be measured by reading the TQ0CCRm register after a capture interrupt request
Select one of the TIQ00 to TIQ03 pins as the capture trigger input pin. Specify “No edge detected” by using the
Remarks 1. For how to set the TIQ0m pin, see Table 8-2 Pins Used by TMQ0 and Table 4-15 Settings When
trigger input)
trigger input)
trigger input)
trigger input)
Pulse width measurement mode (TQ0MD2 to TQ0MD0 bits = 110)
TIQ00 pin
TIQ01 pin
TIQ02 pin
TIQ03 pin
(capture
(capture
(capture
(capture
2. For how to enable the INTTQ0CCm interrupt signal, see CHAPTER 21 INTERRUPT SERVICING/
3. m = 0 to 3
Pins Are Used for Alternate Functions.
EXCEPTION PROCESSING.
k = 1 to 3
Figure 8-65. Configuration of TMQ0 in Pulse Width Measurement Mode
detector
detector
detector
detector
Edge
Edge
Edge
Edge
CHAPTER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
selection
Count
TQ0CE
clock
bit
User’s Manual U18953EJ5V0UD
TQ0CCR0
(capture)
register
TQ0CCR1
(capture)
register
TQ0CCR2
(capture)
register
TQ0CCR3
counter
(capture)
16-bit
register
Clear
INTTQ0OV signal
INTTQ0CC0 signal
INTTQ0CC1 signal
INTTQ0CC2 signal
INTTQ0CC3 signal
431