AT91SAM9261SB-CU-999 Atmel, AT91SAM9261SB-CU-999 Datasheet - Page 685

• Manufacturer Part Number: AT91SAM9261SB-CU-999
• Description: IC MCU ARM9 ULTRA LP 217LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9261SB-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 190MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: DMA, LCD, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 217-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: 2-Wire, I2S, SPI, USB
• Maximum Clock Frequency: 190 MHz
• Number Of Programmable I/os: 96
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9261-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM9261-EK - KIT EVAL FOR AT91SAM926EJ-SAT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

42.3.9.5
42.3.9.6
42.3.9.7
42.3.9.8
42.3.10
42.3.10.1
6242E–ATARM–11-Sep09
Serial Synchronous Controller (SSC)
SPI: Baudrate Set to 1
SPI: Bad Serial Clock Generation on 2nd Chip Select
SSC: Transmitter Limitations in Slave Mode
SPI: Software Reset
SPI: Software Reset Must be Written Twice
When Baudrate is set at 1 (i.e. when serial clock frequency equals the system clock frequency),
and when the fields BITS (number of bits to be transmitted) equals an ODD value (in this case
9,11,13 or 15), an additional pulse is generated on output SPCK. No problem occurs if BITS field
equals 8,10,12,14 or 16 and Baudrate = 1.
None.
If the Software reset command is performed at the same clock cycle as an event for TXRDY
occurs, there is no reset.
Perform another software reset.
Bad Serial clock generation on the 2nd chip select when SCBR = 1, CPOL = 1 and NCPHA = 0.
This occurs using SPI with the following conditions:
Do not use a multiple Chip Select configuration where at least one SCRx register is configured
with SCBR = 1 and the others differ from 1 if NCPHA = 0 and CPOL = 1.
If all chip selects are configured with Baudrate = 1, the issue does not appear.
If a software reset (SWRST in the SPI control register) is performed, the SPI may not work prop-
erly (the clock is enabled before the chip select).
The SPI Control Register field SWRST (Software Reset) needs to be written twice to be correctly
set.
If TK are programmed as input and TF is programmed as output and requested to be set to
low/high during data emission, the Frame Synchro is generated one bit clock period after the
data start, one data bit is lost. This problem does not exist when generating periodic synchro.
The data need to be delayed for one bit clock period with an external assembly.
• Master Mode
• CPOL = 1 and NCPHA = 0
• Multiple chip selects are used with one transfer with Baud rate (SCBR) equal to 1 (i.e., when
• Transmitting with the slowest chip select and then with the fastest one, then an additional
serial clock frequency equals the system clock frequency) and the other transfers set with
SCBR are not equal to 1
pulse is generated on output SPCK during the second transfer.
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
AT91SAM9261S
685