EP9315-IBZ Cirrus Logic Inc, EP9315-IBZ Datasheet - Page 215

• Manufacturer Part Number: EP9315-IBZ
• Description: 32-Bit Microcontroller IC
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-IBZ

• Controller Family/series: (ARM9)
• Core Size: 32 Bit
• A/d Converter: 12 Bits
• Supply Voltage: 3.3V
• No. Of I/o Pins: 65
• Package / Case: 352-PBGA
• Clock Frequency: 200MHz
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1263

DS785UM1
7.4.11.2.1 PattrnMask Register
7.4.11.2.2 BlinkPattrn Register
7.4.11.2.3 BlinkMask Register
7.4.11.3 Types of Blinking
This register defines which bits in a pixel are blink bits. To enable an individual bit for
comparison requires setting that corresponding bit to “1”. To disable an individual bit for
comparison set the bit position to “0”.
For example, in 8bpp mode, the PattrnMask is defined as 0x0000_0080. This means that the
MSB of a pixel is used to assist is defined as a blink bit.
The
The pixel value is first masked by the PattrnMask value in the
result is compared to BlinkPattrn value in the
in a match, the pixel is considered to be a valid blink pixel.
For example:
An 8-bit pixel is defined as 0xAF (0b1010_1111b).
PattrnMask is defined as 0x0000_00C0.
BlinkPattrn is defined as 0x0000_0080.
PattrnMask = 0xC0 defines the two MSBs of 8-bit pixels as potential blink bits. If the two
corresponding MSBs in the BlinkPattrn register are ‘10’ and the two MSBs of the pixel value
are ‘10’, then the pixel of value = 0xAF is a blink pixel. In fact, all pixel values of 10xx_xxxx
are blink pixels. If BlinkPattrn was changed to 0x0000_0048 above, a pixel of value 0xAF
would not be a blink pixel.
The
“PixelMode”
register is ANDed (clearing bits), ORed (setting bits), or XORed (inverting bits) with a pixel
that addresses the LUT. The mask allows a blinking pixel to jump from a normal color
definition location to a blink color definition location in the LUT.
Once a pixel has been defined as a blink pixel, it is necessary to provide information on how
that pixel will blink. The blink type provides determines what operations are performed on the
pixel data as it moves through the blink logic to transform it into a blinking pixel.
There are 10 ways to blink a pixel once it has been defined as a blinking pixel. The blink type
is defined by the M[3:0] bits in the
0000 - Blink Disabled
0001 - AND Blinking.
“BlinkPattrn”
“BlinkMask”
continue through the pipeline.
The pixel data is ANDed with the
LUT Blink:
register are set for an AND, OR, or XOR operation. The value in the
register is only used if the blink mode definition bits M[3:0] in the
register is used to further refine which pixel pattern defines a blink pixel.
Copyright 2007 Cirrus Logic
“PixelMode”
Raster Engine With Analog/LCD Integrated Timing and Interface
“BlinkMask”
“BlinkPattrn”
register:
register. The modified pixel data will
register. If the comparison results
“PattrnMask”
EP93xx User’s Guide
register and the
“BlinkMask”
7-33
7