CS1D-IC102D Omron, CS1D-IC102D Datasheet - Page 622

• Manufacturer Part Number: CS1D-IC102D
• Description: CS1D Dual IO Control Unit
• Manufacturer: Omron

Specifications of CS1D-IC102D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Mounting to the Unit
Mount the Converter to the RS-232C port (D-Sub, 9-pin) of the Unit to be connected in the following way.
1. Align the Converter’s connector with that of the Unit and push it into the Unit’s connector as far as possible.
2. Tighten the mounting screws on either side of the Converter. (Tightening torque: 0.3 N m.)
Wiring Examples
Wiring for Four-wire Cable
CJ1W-CIF11 RS-422A Converter
As an example, connection to a CS1D CPU Unit is shown below.
DIP Switch Settings
Terminating resistance
Two-wire/four-wire
Two-wire/four-wire
Not used.
RD control
SD control
ON (with)
OFF (four-wire)
OFF (four-wire)
OFF
OFF (without)
OFF (without)
CS1D CPU
Unit
OFF (without)
OFF (four-wire)
OFF (four-wire)
OFF
OFF (without)
ON (with)
CS1D CPU Unit
(slave 0)
ON (with)
OFF (four-wire)
OFF (four-wire)
OFF
OFF (without)
ON (with)
CS1D CPU Unit
(slave 1)
Appendix G
587