RD38F1020C0ZBL0 Intel, RD38F1020C0ZBL0 Datasheet - Page 26

• Manufacturer Part Number: RD38F1020C0ZBL0
• Manufacturer: Intel

Specifications of RD38F1020C0ZBL0

• Operating Supply Voltage (max): 3.3V
• Operating Temperature (max): 85C
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Not Compliant

C3 SCSP Flash Memory
5.0
5.1
Warning:
Table 9.
26 Aug 2005
26
Extended Operating Temperature
Storage Temperature
Voltage on Any Ball (except F-VCC /F-VCCQ / S-VCC and F-VPP) with
Respect to GND
F-V
F-V
Output Short Circuit Current
Notes:
1.
2.
3.
4.
During Read
During Flash Block Erase and Program
Temperature under Bias
PP
CC
Voltage (for Block Erase and Program) with Respect to GND
/ F-V
Electrical Specifications
Absolute Maximum Ratings
Stressing the device beyond the Absolute Maximum Ratings in
damage. These are stress ratings only. Do not operate the flash memory device beyond the
Operating Conditions in
affect device reliability.
Absolute Maximum Ratings
Minimum DC voltage is –0.5 V on input/output balls. During transitions, this level may undershoot
to –2.0 V for periods < 20 ns. Maximum DC voltage on input/output balls is F-V
+ 0.5 V which, during transitions, may overshoot to
F-V
Maximum DC voltage on F-V
F-V
for 1000 cycles on the main blocks and 2500 cycles on the parameter blocks during program/
erase. F-V
details
Output shorted for no more than one second. No more than one output shorted at a time.
NOTICE: This datasheet contains information on products in full production. The specifications are subject to
change without notice. Verify with your local Intel Sales office that you have the latest datasheet before finalizing a
design
CCQ
CC
PP
.
Intel
/ F-V
voltage is normally 1.65 V–3.3 V. Connection to supply of 11.4 V–12.6 V can only be done
/ S-V
PP
CCQ
®
CC
may be connected to 12 V for a total of 80 hours maximum. See
Advanced+ Boot Block Flash Memory (C3) SCSP Family
Supply Voltage with Respect to GND
/ S-V
CC
Order Number: 252636, Revision: 004
Parameter
+ 2.0 V for periods < 20 ns.
Table
PP
may overshoot to +14.0 V for periods < 20 ns.
10. Extended exposure beyond these Operating Conditions might
–25°C to +85°C
–65°C to +125°C
–0.5 V to +3.3 V
–0.5 V to +13.5 V
–0.2V to +3.3 V
100 mA
Table 9
Maximum Rating
CC
Section 4.2.1
might cause permanent
/ F-V
CCQ
/ S-V
for
CC
Datasheet
1
1,2,4
3
Notes