PIC24HJ128GP510-I/PT Microchip Technology Inc., PIC24HJ128GP510-I/PT Datasheet - Page 141

• Manufacturer Part Number: PIC24HJ128GP510-I/PT
• Description: MCU, 16-Bit, 128KB Flash, 8KB RAM, 85 I/O, TQFP-100
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24HJ128GP510-I/PT

• A/d Inputs: 32 Channel, 12-Bit
• Cpu Speed: 40 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 85
• Interface: CAN/I2C/SPI/UART
• Memory Type: Flash
• Number Of Bits: 16
• Number Of Inputs: 85
• Number Of Pins: 100
• Package Type: 100-pin TQFP
• Programmable Memory: 128K Bytes
• Ram Size: 8K Bytes
• Speed: 40 MIPS
• Timers: 9-16-bit, 4-32-bit
• Voltage, Range: 3-3.6 V
• Voltage, Rating: 3-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

13.0
The input capture module is useful in applications
requiring frequency (period) and pulse measurement.
The PIC24HJXXXGPX06/X08/X10 devices support up
to eight input capture channels.
The input capture module captures the 16-bit value of
the selected Time Base register when an event occurs
at the ICx pin. The events that cause a capture event
are listed below in three categories:
1.
2.
FIGURE 13-1:
© 2007 Microchip Technology Inc.
Note:
Note: An ‘x’ in a signal, register or bit name denotes the number of the capture channel.
ICx Pin
Simple Capture Event modes
-Capture timer value on every falling edge of
-Capture timer value on every rising edge of
Capture timer value on every edge (rising and
falling)
input at ICx pin
input at ICx pin
INPUT CAPTURE
This data sheet summarizes the features
of this group of PIC24HJXXXGPX06/X08/
X10 devices. It is not intended to be a
comprehensive reference source. To com-
plement the information in this data sheet,
refer to the “PIC24H Family Reference
Manual”. Refer to the Microchip web site
(www.microchip.com)
PIC24H
sections.
Prescaler
(1, 4, 16)
Counter
3
INPUT CAPTURE BLOCK DIAGRAM
Family
System Bus
ICxCON
ICM<2:0> (ICxCON<2:0>)
ICOV, ICBNE (ICxCON<4:3>)
Mode Select
Reference
for
Edge Detection Logic
Clock Synchronizer
the
PIC24HJXXXGPX06/X08/X10
ICxI<1:0>
and
Manual
latest
(in IFSn Register)
Set Flag ICxIF
Interrupt
Logic
3.
Each input capture channel can select between one of
two 16-bit timers (Timer2 or Timer3) for the time base.
The selected timer can use either an internal or
external clock.
Other operational features include:
• Device wake-up from capture pin during CPU
• Interrupt on input capture event
• 4-word FIFO buffer for capture values
• Input capture can also be used to provide
Sleep and Idle modes
- Interrupt optionally generated after 1, 2, 3 or
additional sources of external interrupts
Note:
-Capture timer value on every 4th rising edge
-Capture timer value on every 16th rising
Prescaler Capture Event modes
4 buffer locations are filled
of input at ICx pin
edge of input at ICx pin
Logic
FIFO
R/W
Only IC1 and IC2 can trigger a DMA data
transfer. If DMA data transfers are
required, the FIFO buffer size must be set
to 1 (ICI<1:0> = 00).
From 16-bit Timers
TMRy TMRz
1
ICxBUF
16
0
DS70175F-page 139
16
ICTMR
(ICxCON<7>)