PIC24HJ128GP510-I/PT Microchip Technology Inc., PIC24HJ128GP510-I/PT Datasheet - Page 20

• Manufacturer Part Number: PIC24HJ128GP510-I/PT
• Description: MCU, 16-Bit, 128KB Flash, 8KB RAM, 85 I/O, TQFP-100
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24HJ128GP510-I/PT

• A/d Inputs: 32 Channel, 12-Bit
• Cpu Speed: 40 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 85
• Interface: CAN/I2C/SPI/UART
• Memory Type: Flash
• Number Of Bits: 16
• Number Of Inputs: 85
• Number Of Pins: 100
• Package Type: 100-pin TQFP
• Programmable Memory: 128K Bytes
• Ram Size: 8K Bytes
• Speed: 40 MIPS
• Timers: 9-16-bit, 4-32-bit
• Voltage, Range: 3-3.6 V
• Voltage, Rating: 3-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC24HJXXXGPX06/X08/X10
2.3
REGISTER 2-1:
DS70175F-page 18
bit 15
bit 7
Legend:
C = Clear only bit
S = Set only bit
‘1’ = Bit is set
bit 15-9
bit 8
bit 7-5
bit 4
bit 3
bit 2
bit 1
Note 1: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority
R/W-0
U-0
—
2: The IPL<2:0> Status bits are read only when NSTDIS = 1 (INTCON1<15>).
CPU Control Registers
(1)
Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when
IPL<3> = 1.
Unimplemented: Read as ‘0’
DC: MCU ALU Half Carry/Borrow bit
1 = A carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized data)
0 = No carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized
IPL<2:0>: CPU Interrupt Priority Level Status bits
111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled
110 = CPU Interrupt Priority Level is 6 (14)
101 = CPU Interrupt Priority Level is 5 (13)
100 = CPU Interrupt Priority Level is 4 (12)
011 = CPU Interrupt Priority Level is 3 (11)
010 = CPU Interrupt Priority Level is 2 (10)
001 = CPU Interrupt Priority Level is 1 (9)
000 = CPU Interrupt Priority Level is 0 (8)
RA: REPEAT Loop Active bit
1 = REPEAT loop in progress
0 = REPEAT loop not in progress
N: MCU ALU Negative bit
1 = Result was negative
0 = Result was non-negative (zero or positive)
OV: MCU ALU Overflow bit
This bit is used for signed arithmetic (2’s complement). It indicates an overflow of the magnitude which
causes the sign bit to change state.
1 = Overflow occurred for signed arithmetic (in this arithmetic operation)
0 = No overflow occurred
Z: MCU ALU Zero bit
1 = An operation which affects the Z bit has set it at some time in the past
0 = The most recent operation which affects the Z bit has cleared it (i.e., a non-zero result)
IPL<2:0>
R/W-0
of the result occurred
data) of the result occurred
U-0
—
SR: CPU STATUS REGISTER
(2)
(2)
R = Readable bit
W = Writable bit
‘0’ = Bit is cleared
R/W-0
U-0
—
(2)
U-0
R-0
RA
—
U = Unimplemented bit, read as ‘0’
-n = Value at POR
x = Bit is unknown
R/W-0
U-0
—
N
(2)
R/W-0
U-0
OV
—
© 2007 Microchip Technology Inc.
R/W-0
U-0
—
Z
R/W-0
R/W-0
DC
C
bit 8
bit 0